Installation guide

202 Advisor Master Programming Guide
Additional zone types
The following zone types are additional and have no influence on EN 50131
compliance.
7. Camera Suspicion Zone
15. Firedoor
20. Zone to Event Flag 24Hr
21. Firedoor With User Code
23. Camera 1 Count
24. Camera 2 Count
25. Camera 3 Count
26. Camera 4 Count
27. Technical with Report
30. Firedoor with Reset
32. Armed Zone to Event Flag
36. Camera 5 Count
37. Camera 6 Count
38. Camera 7 Count
39. Camera 8 Count
41. Entry/Exit Firedoor
42. Entry/Exit Firedoor w Code
43. Disarm Zone to Event Flag
44. Firedoor with AlmGrp Restr.
45. (Event Flag/Arm.Alm) Restr.
46. Disarm Alm/Arm Gen. Alm
47. Dis. Alm Susp/Arm Gen. Alm
48. Camera 1 Film Out
49. Camera 2 Film Out
50. Camera 3 Film Out
51. Camera 4 Film Out
52. Camera 5 Film Out
53. Camera 6 Film Out
54. Camera 7 Film Out
55. Camera 8 Film Out
56. Firedoor if No TZ 41
57. Technical Report & Screen
58. Technical Screen
67. Latched detector
70. Keybox
71. Lock monitor
The following zone types are additional and are not certified — do not use in
EN 50131 certified systems.
6. Pulsed Keyswitch
8. Dis. delay/Arm Gen. Alm
9. Reset Delayed Zones
11. Dis. Delay Alarm
12. Restart Exit Timer
16. 24Hr Local Mains Fail
22. Dis. Delay Reset/Arm Alm
28. Armed Alarm with Reset
29. 24-Hour Alarm with Reset
31. Latching Keyswitch
33. 24Hr Alarm & Inhibit
34. Area Dis/AlmGrp Restr. Arm
35. Area AlmGrp Restr Arm Only
40. Dis. Susp. Delay/Arm Alm
59. 24 Hour Alarm If No TZ 41
65. Engineering reset switch
72. GVE zone
73, 74. Request to arm / disarm
76. VdS tamper zone