Installation guide

Advisor Master Programming Guide 209
Index
2
200 baud reverse area armed/disarmed, 96
A
abort time, 68
ACPO, 83
active zones
arming with active zones, 55
Advanced Wireless DGP, 87
alarm control
alarm group restrictions, 115
arm with active zones, 55
auto arm/disarm, 123
cards always arm/disarm, 43
cards auto disarm, 43
combining access control and alarm
control, 72
common areas, 127
entry/exit, 7
entry/exit buzzers, 44
entry/exit time, 28, 29
forced arming, 55
latching system alarms, 74
lockout RAS on wrong codes, 44
no alarm group restriction assigned, 116
only using one key, 43
operation of alarm group restriction with
arm/reset, 116
operation of alarm group restriction with
timed disarm, 115
operation of alarm group restriction with
timed disarm and arm/reset, 116
reset alarm without PIN, 43
restrict to arm/reset, 54
restrict to disarm, 54
restrict to reset only, 54
unlock door, 42
when using cards, 41
alarm group restrictions, 115
alarm groups, 50
area disarmed time, 33
assign to alarm groups, 56
disable auto insert, 75
disarmed time, 62, 116
name, 117
no arming if no disarmed timer running, 57
no restriction assigned, 116
number, 117
only allow disarm on RAS, 44
operation of arm/reset, 116
operation of restriction 7 - emergency, 116
operation of restriction 8 - counter, 116
operation of timed disarm, 115
operation of timed disarm and arm/reset,
116
program alternate arm/reset, 120
program alternate timed disarm, 118
program arm/reset, 117
program timed disarm, 117
reporting emergency, 115
used for counting, 115
used with auto arm/disarm, 123
using vaults, 126
warning time, 63, 116
alarm groups, 50
accessing panel via dial-up modem, 55
activating keypad duress with a code, 53
alarm group restrictions, 115
alternate alarm groups, 59, 118
areas, 50
arming and resetting only, 50
arming station alarm group, 50
assign restrictions, 56
assigning an alarm group to a user, 52
assigning areas, 52
assigning control functions, 52
assigning to arming stations, 39
auto inhibit active zones, 55
auto reset alarms, 93
auto uninhibit on disarm, 73
default settings for alarm groups, 50
disabling auto uninhibit function, 54
forced arming, 55
important issues, 50
name, 51
no arming if no disarmed timer running, 57
not available to user, 52
number, 50
only available at certain periods, 59
prevent forced disarming, 55
program an alarm group, 50
reseting latching system alarms, 53
restrict alarm control to disarm only, 54
restrict alarm control to reset only, 54
restricting alarm control to arm/reset, 54
restriction with emergency alarm, 56
restrictions only allow disarm on RAS, 44
restrictions operating as counter, 57
show list of areas when arming/disarming,
53
timed disarm, 50
timezone, 59
timezones, 50
used to auto arm/disarm, 123
user can override line fault, 61
user level, 60
user menu options, 58
what is an alarmgroup, 50