Installation guide

210 Advisor Master Programming Guide
zone database, 20
alarm-A event flag, 32
alarm-B event flag, 32
alarms
A to B alarm delay (ACPO), 66
activate siren and strobe on system alarm,
74
auto reset, 93
auto reset time, 93
disable flashing area LEDs, 76
display alarms immediately, 76
latching system alarms, 74
program local alarm reminder time, 64
reset latching system alarms, 53
reset without using PIN, 43
silent alarms until fail to report, 77
alert indicator event flag, 35
anti-mask detector, 27
anti-mask reset event flag, 31
anti-mask/fault event flag, 35
area database, 28
A&B reporting (ACPO), 34
active event flag, 30
area name and number, 28
armed alarm event flag, 30
audio listen in, 33
chime/camera event flag, 31
disarmed alarm event flag, 30
disarmed event flag, 29
disarmed time, 33
entry time event flag, 31
entry/exit time, 28, 29
exit fault reporting, 33
exit time event flag, 30
inhibit arming if all inhibited, 34
inhibited alarm flag, 30
local alarm event flag, 30
number, 28
out of hours timezone, 32
pre-alarm event flag, 31
reporting, 33
warning time event flag, 31
area linking, 127
using common areas, 127
area tamper alarm event flag, 34
areas. See area database
alarm groups, 50
area linking, 127
assigned to alarm groups, 52
common areas, 20
name and number, 28
used as vaults, 126
zones, 20
areas assigned to vaults, 126
arm complete event flag, 34
arm complete time, 67
arm test
operation mode, 71
test sirens, 75
time to perform an arm test, 63
arm/disarm timers
using restrictions with arm/disarm timers,
124
arming prevent, 88
arming without battery, 80
arming without mains, 86
ATS system code, 82
audible alert, 91
audio listen in, 18, 33
audio listen in frame, 96
audio listen in time, 96
authorize computer connection, 144
auto arm/disarm, 123
number, 123
postpone automatic arming, 124
program alarm group to use, 123
program timezone to use, 123
auto reset, 93
alarm group, 93
auto reset time, 93
automatic testing procedure for zones, 20
AWDGP, 87, 92
B
battery fault
override, 90
battery testing, 147
frequency, 147
holidays, 148
manually testing, 148
select battery test program, 147
starting time, 147
test period, 147
test report, 148
Bell 103 protocol, 143
buzzer, 91
C
calibration, 176
camera
film low level, 70
film out level, 71
reset using 0, Enter, 75
suspicion time, 64
cards. See door control
second system code, 129
system code, 128
cards arm after 3 badges, 44
challenge code, 89, 92
change own PIN, 57
channel mapping, 164
chime, 87
enable on RAS, 47
chime on RAS, 38
chime time, 68
class database, 161, See reporting
enable audio listen in for a condition, 162
explanation of reporting, 180
list of reporting classes, 180