Installation guide

214 Advisor Master Programming Guide
specify if the macro output triggers an event
flag or a zone, 158
time period for macro output, 158
use macro inputs to set up logic equations,
159
what will the result of the logic equation do,
158
program next service, 150
enter next service date, 150
text displayed on service date, 150
program text, 102
programming
how to program, 5
programming four-door/four-lift DGP or one-
door RAS, 138
programming menu
accessing, 4
explanation of the LCD display, 5
master engineer code, 4
moving around between the menu options,
5
R
random key, 89
RAS. See remote arming stations
lockout, 88
RAS fault
override, 91
RAS lockout, 68
remote arming stations, 39
alarm control when using cards, 41
alarm control with one key, 43
alarm group, 50
alarm group restrictions, 117
alarm group restrictions only disarm, 44
area alarm group, 39
buzzer for entry/exit, 44
cards always arm/disarm, 43
cards auto disarm, 43
code tamper, 46
disable flashing area LEDs, 76
disable status LEDs, 45
display alarms immediately, 76
display shunted zone, 42
enable chime, 47
enable polling, 39
Enter key operation, 42
LCD arming station, 40
lockout, 46
lockout RAS on wrong codes, 44
menu alarm group, 40
offline, 39
online, 39
output controller, 40
overview of options available, 41
program 1-door RAS, 138
program to open a door, 40
RAS offline event flag, 152
reset alarm without PIN, 43
screen saver, 46
troubleshooting, 194
unlock door on alarm code, 42
view poll errors, 135
report line fault, 96
report mains fault, 96
reporting, 180
A&B alarm (ACPO), 34
account codes per area, 98
allow audio listen in (CS), 99
area (opening/closing), 33
audio listen in (area), 33
audio listen in (zones), 18
class database, 161
delay disarmed alarms, 64
delay for entry/exit alarms, 66
delay for mains failure, 66
dual reporting, 99
exit fault, 33
fail to report event flag, 153
list of events being reporting by zones, 180
list of reported system events for large
reporting, 190
list of reported system events for small
reporting, 188
multiple alarms, 79
multiple restores, 79
program account codes, 98
program central station phone nbrs, 98
report inhibits, 99
select reporting format for central station,
97
SIA uses 3 digit extensions, 95
test calls, 163
use Bell or CCITT for SIA, 98
zones to central station, 18
reporting formats, 97
reset alarm
when using cards, 41
without PIN, 43
reset the control panel, 113
response code, 89
S
screen saver, 85
screen saver timeout time, 66
secure code, 89
security grade, 86
security password, 142
select the central station to program, 97
sending arming after exit, 80
service. See program next service
time to service the system, 64
timezone 25, 111
SIA area modifier, 100
SIA reporting with 3 digit extensions, 95
signalling fault
override, 90