Installation guide

218 Advisor Master Programming Guide
Programming map
Simple/Advanced Menu
Legend:
*-Advanced
Simple menu
Advanced menu
1-Zone database
Zone number
Zone type
Trigger EF 2, armed alarm
Zone name
Trigger EF 3, armed alarm
Reporting of zone
Trigger EF 4, armed alarm
Report alarm to CS 1
Trigger EF 5, armed alarm
Report alarm to CS 2
Trigger EF 6, disarmed alarm
Report alarm to CS 3
Trigger EF 7, disarmed alarm
Report alarm to CS 4
Trigger EF 8, 24 hr alarm
Enable audio listen in
Trigger EF 9, armed alarm
Engineer Reset on Alarm
Trigger EF 10, armed alarm
Engineer reset for tampers
Trigger EF 11, armed alarm
Disable inhibit
Trigger zone EF if active
Enable soak test
Trigger chime/camera EF in area DB
Area / alarm group assignment
Print zone when active
Test option
Engineer walk test
Zone event flag
Double Knock
Internal siren event flag
User walk test
External siren event flag
Anti-mask detector
Keypad buzzer
Part set zone
Make all events 24 hour
2-Area database
Select the area to program
Area name
Report to Central Station 4
Exit time
Enable audio listen in
Entry time
Enable exit fault reporting
External siren event flag
A&B alarm reporting (ACPO)
Internal siren event flag
Disable arming if all inhibited
Area disarmed event flag
KeyBox time (min)
Area active event flag
Area tamper alarm event flag
Inhibited event flag
Arm complete event flag
Armed Alarm event flag
Disarm complete event flag
Disarmed alarm event flag
Alert indicator event flag
Local alarm event flag
Panic alarm event flag
Exit timer event flag
Anti-mask/fault event flag
Entry timer event flag
Mask event flag
Warning timer event flag
Fault event flag
Chime/camera event flag
Panic Alarm (Hold-up) A
Pre-alarm timer event flag
Panic Alarm (Hold-up) B
Anti-mask reset event flag
Part set exit time
Latched reset event flag
Part set entry time
Alarm-A event flag
Part set exit buzzer
Alarm-B event flag
Part set external siren
Out-of-hours timezone
Part set access to E/E
Area disarmed time
Enable part set reporting
Report to Central Station 1
Disable part set B-alarms
Report to Central Station 2
Chime on RAS
Report to Central Station 3
