Installation guide

Advisor Master Programming Guide 219
3-RAS database
RAS to be polled
Select RAS to program
Area alarm group
AG restriction disarm only
Menu alarm group
Entry/exit buzzers
Door event flag
Timed lockout by wrong codes
Output controller assigned
Cards arm after 3 badges
LCD arming station
Disable status LED's
Toggle Area status
3 LED RAS
Enter key opens door only
Card & PIN (disarm only)
Door event flag on alarm codes
RAS tamper (ACPO) area
Display shunted zone on LCD
Card & PIN (always)
Arm/disarm using one key
Enter unlocks screen saver
Cards auto disarm
RAS code tamper event flag
Card always arms/disarms
Enable chime
Reset from RAS without code
Timed lockout by wrong badges
4-DGP database
DGPs to be polled
DGP type
DGP Tamper (ACPO) Area
DGP battery test event flag
5-Alarm groups
Alarm group number
Alarm group name
Alarm group restriction 1
Areas assigned
Alarm group restriction 2
User alarm group
Alarm group restriction 3
Alarm system control
Alarm group restriction 4
List of areas
Alarm group restriction 5
Keypad duress
Alarm group restriction 6
Reset system alarm
AlmGrp restriction 7, Emergency
Disable auto-uninhibit
AlmGrp restriction 8, Counter
Restricted To Arm & Reset
No arming if restriction not timing
Disarm only
Change own PIN only
Alarm reset only
Allow Stop Voice reporting
Auto inhibit active zones
Timezone
Forced arming when active
Alternate alarm group
Prevent forced disarming
User level
Modem access
User Can Override Line Fault
User menu options:
1. Panel status
10. Inhibit zone
19. Installer programming
2. Active zones
11. Uninhibit zone
20. Door and floor groups
3. Zones in alarm
12. Walk test
21. Holidays
4. Inhibited zones
13. Start auto disarm test
22. Open door
5. History
14. Program users
23. Unlock,lock,disable,enable
6. Test report
15. Time & date
24. Print history
7. Service menu
16. Isolate/de-isolate RAS/DGP
25. TML menu entry
8. Film counters
17. Authorization Sevice In
26. Chime options
9. List zone names
18. Reset cameras
27. HSR management
