Installation guide

220 Advisor Master Programming Guide
6-Timers
AG restriction 1 disarmed time
Mains fail delay time
AG restriction 2 disarmed time
Delay reporting alarms for
AG restriction 3 disarmed time
A to B alarm delay (ACPO)
AG restriction 4 disarmed time
Screen saver timeout time
AG restriction 5 disarmed time
RAS card & PIN timeout
AG restriction 6 disarmed time
Double knock interval (min)
AG restriction 7 disarmed time
Double knock duration (sec)
AG restriction 8 disarmed time
Reserved
Disarm test time
Arm complete time (sec)
Arm test time
Disarm complete time (sec)
Warning time
Abort time (sec)
Disarmed alarm delay time
RAS lockout time
Suspicion time
Chime time is set to
Service time available
Reserved
Local alarm reminder time
Computer access time
Individual zone test time
Access time for PIN of the day
Doors unlock time
Reserved
Testing event flag time
Reserved
External siren set to
Reserved
Internal siren set to
Panic A to B delay
Siren delay set to
7-System options
Areas selected for total disarm
Inhibit alarm report on exit fault
Film low level
Disable tamper report in disarm
Film out level
Inhibit ext.sir&strobe for disarm tamper
Test mode
ATS system code
No. of output controllers
Soak test days
Zone event text
ACPO
Alarm code prefix
EE confirm disable (ACPO)
LCD rotation delay
Engineer reset on ACPO zone B alarm
LCD rotation speed
NFA2P
Dual zone
Installer dual code
Auto uninhibit on disarm
Enable buzzer on mains/line fault
Display one zone at a time
Enable "Call Central Station" display
Username file
Screen saver
System alarms set siren and strobe
Enable log limitations
Latching system alarms
Indicate inhibited zones
Siren testing
Confirm area
Disable "0, ENTER" for camera reset
Eng Rst on ACPO zone B tamper
Disable insert of AG restriction
Eng Rst on ACPO system B tamper
Reserved
Security grade
Disable code from displaying
Ignore AC mains fault when arming
Disable flashing area LEDs
Latch mains/battery/line faults
Two users before programming code
Enable PA siren on FTC
Display alarms instantly on LCD
Latch AWDGP jam and supervision
Sirens only after FTC
Enable chime
Financial options
Synchronize DGP users records
Display user flags
Engineer reset on RAS lockout
Delayed disarmed alarm lockout
Prevent arming on faults
Zone expansion fitted
PIN of the day option
Inhibit zone tamper
Override AC mains fail
Report multiple alarms
Override battery fault
Report multiple restores
Override signalling fault
Engineer reset for system alarms
Override siren fail

Engineer reset for system tampers
Override detector trouble