Installation guide

222 Advisor Master Programming Guide
16-Event to output
Output number
Event flag number
Active or inactive during timezone
Timezone to control output
Invert output
17-Auto arm/disarm
Auto arm/disarm program
Timezone to arm/disarm
Alarm group to auto arm/disarm
18-Vaults
19-Area linking
Linking areas
20-System codes
System code 1
System code 2
Card offset 1
Card offset 2
21-Zone shunts
Shunt timer number
Zone number to shunt
Shunt zone when disarmed
Output number to start shunt
Shunt zone when armed
Shunt time
Cancel door event flag
Shunt warning time
Zone holds event flag for 2 seconds
Shunt event flag
Entry/exit shunting
Shunt warning event flag
Log door open/close
Door open command starts shunt
22-Timezone to follow output
Select timezone
Assign output to follow
23-Poll errors
Select device type
24-Download to remote device
Select download option
Display download status
Download all
25-Display last card
26-Reserved menu
27-Reserved menu
28-To remote devices
Select the device type
Select the device to program
29-Computer connection
Enable remote up/download
Computer address
Up/download if any area armed
Security password
Enable remote control
Connection attempts
Remote control if any area armed
Number of rings before answering
Use modem init string
Number of calls before answering
Enter modem init string
Answering machine defeat
Report alarms to computer
Reserved
Report access events
Use Bell 103 protocol
Computer telephone number
Connection type
Up/Download callback number
Authorize computer connection
Service telephone number
