Installation guide

Advisor Master Programming Guide 17
Zone name
1: Office 4 Door 2 Contact
TextWord 1:
Once the correct zone number is selected, the zone needs to be given a name.
The name identifies the zone to the end-user in case an alarm has occurred or
on arming the zone is still activated. Without a proper name, the end-user would
not be able to check for any problems that might arise in a particular zone.
A zone name can consist of 4 words from the library (called text words), each
separated by a 3 digit number between 1 and 255 (called a text variable). If a
number is not necessary, program the number as 0. This way the number will not
be used and the text words are combined using a space. Text variables can only
be used in combination with a text word. The complete name can have a
maximum length of 36 characters.
Zone names are taken from the library. The library contains a maximum of 900
words. Each word is identified as a number. This number has to be entered on
programming the zone name (see Table 9 on page 104). If a word does not exist,
it can be added in the programmable library, using menu 10-Program text (see
page 102). The programmable library can contain 100 words that have to be
programmed before they can be used.
Examples:
• Office 4 Door 1 Contact
• Office 4 Door 2 Contact
• Building 6 Area 4 Room 1 Door 6
• Building 6 Area 4 Door Right
How to program zone names:
• Menu: Move to the next word or variable.
• ?, Enter: Enter the new information and press the Enter key.
• 0, Enter: Delete the word or variable. All words or variables are deleted from
this point onwards.
• Enter: Press the Enter key again to save the displayed information and move
to the next menu option display.
Using your own text words
If the library does not contain the correct text words, they can be programmed in
the menu 10-Program text (page 102). They have to be programmed before they
can be used.
Reporting of zone
1: 17-130, Burglar Alarm
Report:
Select the alarm to be reported if the zone generates an alarm. The event is
selected from the class database and the subclasses. The actual message that is