Installation guide

Advisor Master Programming Guide 31
Entry timer event flag
Area 1 Entry Timer No Event Flag
Event Flag:
Activates when an entry time for the area is running.
See also “External siren event flag” on page 29.
Warning timer event flag
Area 1 Warning Time No Event Flag
Event Flag:
Activates to indicate that:
• An alarm group restriction timer is running and the area is about to be armed.
• A testmode is in progress and the test is about to end.
See also “External siren event flag” on page 29.
Chime/camera event flag
Area 1 Chime/Camera No Event Flag
Event Flag:
Activates when a zone with the chime/camera event flag set to Yes generates an
alarm and the area is disarmed. Used to control chime or cameras. The camera
event flag can be reset by pressing Enter, Enter, 0, Enter.
Note: To activate the chime/camera event flag when the area is disarmed, see
“Make all events 24 hour” (page 23) and Trigger chime/camera (page 25).
See also “External siren event flag” on page 29.
For more information on the chime functionality, see “Enable chime” in System
Options on page 87.
Pre-alarm timer event flag
Area 1 Pre-Alarm Timer No Event Flag
Event Flag:
Indicates that a delayed disarmed alarm zone is active and the delay time is
running. Used to provide visual indication of a possible alarm.
See also “External siren event flag” on page 29.
Anti-mask reset event flag
Area 1 Anti-Mask Reset No Event Flag
Event Flag:
This event flag forces the user to test the detectors before the area can be
armed. If an attempt to arm an area that has the anti-mask event flag set to a
non-zero value and any inputs associated with this area are active, the event flag
is set for 30 minutes. The anti-mask reset event flag is active for the duration of