Installation guide

Advisor Master Programming Guide 51
Table 7: Default settings for alarm groups
Number
Name
User menu options
1.
No access
All set to No
2.
Master RAS or door
All set to Yes
3.
Master code access
All set to Yes except 25
4.
8 area master RAS (1-8)
All set to Yes except 25
5.
8 area master RAS (9-16)
All set to Yes except 25
6.
Master user
All set to Yes except 25
7.
Manager
All set to Yes except 19
8.
Master Installer
All set to No
9.
Master Service
All set to Yes except 25 and timezone 25
10.
Spare alarm group
All set to No except 26
11.
High level master
All set to Yes except 19
12.
Low level master
All set to Yes except 1, 5, 9, 10, 11, 14, 15, 16, 26
13.
All area user
All set to Yes except 1, 2, 3, 4, 5, 9, 10, 11, 26
14 to 29
Area one to area sixteen
All set to Yes except 1, 2, 3, 4, 5, 9, 10, 11, 26
Alarm groups 14 to 29 are for individual areas. The areas assigned by default to
the alarm groups are as follows:
Alarm group
Area
Alarm group
Area
Alarm group
Area
14
1
19
6
24
11
15
2
20
7
25
12
16
3
21
8
26
13
17
4
22
9
27
14
18
5
23
10
28
15
29
16
Note: In a new system, alarm groups 11 to 29 are pre-programmed with some
standard settings. You can change them if necessary. Alarm groups 30 to 138
are programmable to suit individual system requirements.
Alarm group settings
Alarm group name
Alm/Grp Name: 0297, Engineering
Text No:
Every alarm group can be programmed with a name to identify the alarm group.
The words are selected from a list already held by the ATS system. They can be
either from the list of standard words available (see Table 9 on page 104), or