Installation guide

54 Advisor Master Programming Guide
Disable auto-uninhibit
NO-Disable Auto-Uninhibit
*-Change 0-Skip:
Determines that inhibited zones are uninhibited on disarming the area the zone
belongs to.
Yes: Disarming the area will not automatically uninhibit zones in the area. Used
for cleaners, etc.
No: Disarming the area will automatically uninhibit zones.
Press 0 to go to the user menu items available.
Note: “Auto uninhibit on disarm” on page 73 in “7-System options” has to be set
to Yes.
Restricted To Arm & Reset
NO-Restricted To Arm & Reset
*-Change 0-Skip:
Restricts alarm control to arm and alarm reset only.
Yes: Only arm and reset are allowed.
No: There are no alarm control restrictions.
Press 0 to go to the user menu items available.
Note: “Alarm system control” on page 52 has to be set to Yes
Disarm only
NO-Restricted To Disarm Only
*-Change 0-Skip:
Restricts alarm control to disarm only.
Yes: Only disarm is allowed.
No: There are no alarm system control restrictions.
Press 0 to go to the user menu items available.
Note: “Alarm system control” on page 52 has to be set to Yes
Alarm reset only
NO-Restricted To Reset Only
*-Change 0-Skip:
Restricts alarm control to alarm reset only.
Yes: Only reset alarm is allowed.
No: There are no alarm system control restrictions.
Press 0 to go to the user menu items available.
Note: “Alarm system control” on page 52 has to be set to Yes