Installation guide

Advisor Master Programming Guide 57
See also “15-Alarm group restrictions” on page 115 and “Alarm group restriction
1”.
AlmGrp restriction 8, Counter
No –User Has Alm/Grp Restr 8 - Counter
*-Change 0-Skip:
Operates as alarm group restriction 1, but on disarming it will increase a counter.
When the area is armed using this alarm group it will decrease the counter.
When the counter reaches 0, it will arm the areas in the alarm group.
Yes: The alarm group restrictions are activated.
No: The alarm group restrictions are not activated.
Press 0 to go to the user menu items available.
See also “15-Alarm group restrictions” on page 115 and “Alarm group restriction
1”.
No arming if restriction not timing
NO-No Arming If Restr. Not Timing
*-Change 0-Skip:
Prevents the alarm group restriction timer to arm the areas if a user without
restriction has disarmed the areas.
Yes: If an area has been disarmed and there is no alarm group restriction timer
running, an alarm group restriction timer cannot be started.
When an alarm group restriction timer expires, it arms the area. By setting this
option you prevent an area from being armed if a user without alarm group
restriction originally has disarmed it.
No: Normal alarm group restrictions apply.
Press 0 to go to timezone.
Change own PIN only
NO-Change own PIN only
*-Change 0-Skip:
Allows the user (if he has access to Menu 14- program users) to change his own
PIN. All other menus of Delete, Display and Create will be absent. The user
cannot see nor display even his own Alarm Group, Door Group, Floor Group or
User name.
Yes: The user can change his own PIN.
No: The user can change the PINs of other users and can access the Menu 14
menus of Delete, Display and Create.
If the “Change own PIN only” option is set to Yes and if the system option
“Disable code from displaying” on page 76 is set to No, then the display will show
the following, if 1111 is the actual PIN.