Installation guide

58 Advisor Master Programming Guide
PIN Code: 1111
Code:
The user enters his new PIN.
PIN Code: 1111
Code: 1234
Followed by entering:
PIN Code: 1234
Code:
The user can change the code again, or press Enter to exit.
If the “Change own PIN only” option is set to Yes and if the System Option
“Disable code from displaying” is set to Yes, then the display will show the
following:
PIN Codes Can Not Be Displayed
Code:
The user can then enter his new PIN and will be asked to confirm.
PIN Codes Can Not Be Displayed
Code: ****
Confirm PIN Code:
Code: ****
The user can change the code again, or press Enter to exit.
PIN Codes Can Not Be Displayed
Code:
Allow Stop Voice reporting
The authorisation for the user to have the ability to stop voice reporting is
selectable via the RAS’s assigned alarm group upon disarming.
Yes: User is allowed to stop the voice reporting (in most cases on areas
assigned to the RAS in use.) Note: Only if the user has a valid alarm group.
No: The user is not allowed to stop the voice reporting.
Press 0 to go to the user menu items available.
User menu options
YES-1-Panel Status
*-Change 0-Skip:
Determines if the user menu item is available in this alarm group to users or
RAS’s.