Installation guide

62 Advisor Master Programming Guide

6-Timers

Program all system wide timers in this section.

Notes

• Timers are accurate on ±1 of the value entered. So a timer set for 20

seconds, will end somewhere between 19 and 21 seconds. Consequently,

avoid using values of 1 second or 1 minute.

• If a timer is set to 0, that timer will not be used.

Timer settings

AG restriction 1 disarmed time

Alm/Grp Restr.1 Disarmed is (Min). 0

Time:

You need to program the individual times (from 0 to 255 minutes) for each alarm

group restriction 1 to 7 for the time it is disarmed. The alarm group restriction has

to be programmed for timed disarm and be assigned to an alarm group.

Notes

• If set to 0, the area(s) will not re-arm automatically. See “15-Alarm group

restrictions” on page 115 for more information.

• The alarm group restriction time will be over-ridden by the “Area disarmed

time” on page 33 (if programmed) in the Area database.

AG restriction 2 disarmed time