Installation guide

Advisor Master Programming Guide 67
system user can also activate the screen saver manually by pressing the CLEAR
key at the Enter Code prompt.
RAS card & PIN timeout
RAS Card & PIN Timeout (Sec).
Time:
Allows you to set the delay time (0 to 255 seconds) between badging the card
and entering the PIN (default is 8 seconds).
Double knock interval (min)
Double Knock Interval (Min).
Time:
If enabled for a particular zone, Double Knock Interval specifies the maximum
permitted time a zone may remain active. If the time for which a zone remains
active exceeds the permitted time, an alarm condition is registered. If this value is
set to zero (‘0’), an alarm is not generated by prolonged activation, but is
determined by Double Knock Interval.
Double knock duration (sec)
Double Knock Duration (Sec).
Time:
If enabled for a particular zone, Double Knock Duration specifies the maximum
permitted time a zone may remain active. If the time for which a zone remains
active exceeds the permitted time, an alarm condition is registered. If this value is
set to zero (‘0’), an alarm is not generated by prolonged activation, but is
determined by Double Knock Interval.
Arm complete time (sec)
Arm Complete Time (sec).
Time:
When the setting procedure has been satisfactorily completed there is a time
limited completion of setting indication to show the system or part thereof has
changed to a set state. A common (global) timer setting is used to initialise each
area timer at the beginning of the confirmation period.
Disarm complete time (sec)
Disarm Complete Time (sec).
Time:
When the unsetting procedure has been satisfactorily completed there is a time
limited completion of unsetting indication to show the system or part thereof has
changed to an unset state. A common (global) timer setting is used to initialise
each area timer at the beginning of the confirmation period.