Installation guide

2 Advisor Master Programming Guide
Advanced set up
The above steps are required to set up any basic system. Items that are not
required can be skipped. Additionally the following items can be programmed:
1. In most cases assigning more then one area to a zone is used to program
common areas. For special common area functions like being able to only
disarm the common area, area linking is required. Program area linking using
menu 19-Area linking.
2. When under certain conditions only restricted access should be available to
users, alarm group restrictions can be required. Program restrictions for alarm
groups using menu 15-Alarm group restrictions.
3. In case timed disarm is necessary to only allow disarming for a certain
amount of time, the disarmed time has to be programmed using menu 6-
Timers.
4. For automatic arming/disarming program 17-Auto arm/disarm.
5. Program additional system options using menu 7-System options.
6. Program up/download facilities using menu 29-Computer connection.
7. If an extensive battery testing is required use program menu 31-Battery
testing.
8. Program necessary system event flags using menu 34-Program system event
flags.
9. If a printer is connected, program the printer settings using menu 30-Printer.
10. When outputs are required to activate Timezones program menu 22-
Timezone to follow output.
11. Program the necessary macro logic in menu 35-Program macro logic.
12. Program the custom LCD text in menu 32-Custom LCD message.
13. When areas in alarm should be reset automatically, program menu 8-Auto
reset.
14. Program vault areas using menu 18-Vaults.
15. Program remote devices like the ATS1170 (one door RAS) or ATS1250 /
ATS1251 / ATS1252 / ATS1253 / ATS1254 (four door/four lift DGP) using
menu 28-To remote devices.
16. Program the required system codes for access control using menu 20-System
codes.
17. When zones should be shunted on access using access control devices like
ATS1170, program menu 21-Zone shunts.
18. Set the next service date (if required) in menu 33-Program next service.