Operating instructions

4.4 Setting the Camera Channel (Optional)

The wireless camera has 4 selectable channels to avoid any interference from any other

wireless devices. Follow the steps below to set or change the frequency channel of the

camera. If you are adding another camera to link with the supplied receiver in this kit, then

ensure its channel is set to a different channel to the existing camera(s).

1. Pull open the rubber flap on the camera’s power cable.

2. Locate the 2 dip switches under the rubber flap.

3. Set the camera channel as per the switch configuration

below using the DIP switch tool provided. Do not set

multiple cameras on the same channel or interference

may appear on screen.

4.5 Setting the Receiver Channel (Optional)

The wireless receiver is capable of receiving up to 4 separate channels. The front of the

wireless receiver has 4 LEDs representing the 4 channels of the receiver. When lit, the

LED will indicate which channel is currently being displayed. In the diagram below CH1

is lit up indicating channel 1 will be displayed on the screen.

The wireless receiver allows you to manually switch between active channels by pushing

the SET button. (The orientation of the channels when pressing the ‘SET’ button each

time is CH1 to CH2 to CH3 to CH4 and back to CH1).

1 2

DIP Switch Tool

1 2 1 2 1 2 1 2

Channel

CH1

CH2

CH3

CH4

SET

Channel SET Button

Channel Indicator Lights