Instructions / Assembly

A. Headboard (1 pc) B. Footboard (1 pc)

E. Center Support (1 pc)

D. Wood Slat System (1 pc)

C. Siderail (2 pcs)

F. Center Leg

(3 pcs)

G. Corner Leg

(4 pcs)

Platform Bed

Contains One (1) Bed and Hardware

IMPORTANT NOTE:

Carefully remove all the parts from the box. Arrange on a at

surface and verify you have all of the following parts and hardware.

PARTS LIST

HARDWARE LIST

(Continued on back)

J. Hex Key (1 pc) K. Washer (4 pcs)I. Screw (9 pcs)H. Bolt (8 pcs)

TOOLS REQUIRED:

Phillips Screwdriver

PAGE 1
Platform Bed Contains One (1) Bed and Hardware IMPORTANT NOTE: TOOLS REQUIRED: Carefully remove all the parts from the box. Arrange on a flat surface and verify you have all of the following parts and hardware. Phillips Screwdriver PARTS LIST A. Headboard (1 pc) D. Wood Slat System (1 pc) B. Footboard (1 pc) C. Siderail (2 pcs) E. Center Support (1 pc) F. Center Leg G. Corner Leg (3 pcs) (4 pcs) HARDWARE LIST H. Bolt (8 pcs) A I. Screw (9 pcs) J. Hex Key (1 pc) K.
PAGE 2
ASSEMBLY INSTRUCTIONS STEP 1 Screw the Center Legs (Part F) into the Center Support (Part E). Screw the Corner Legs (Part G) into the Headboard (Part A) and Footboard (Part B) using one Washer (Part K) for each Corner Leg. STEP 3 Insert the Center Support into the brackets on the Headboard and Footboard. A STEP 2 Screw the bolts (Part H) half way into the Headboard and Footboard. Hang the Siderails (Part C) from the bolts then tighten the bolts using the hex key (Part J).