Instructions / Assembly

STEP 1

STEP 2

STEP 4

ASSEMBLY INSTRUCTIONS

STEP 3

Screw the Center Legs (Part F) into the Center Support

(Part E). Screw the Corner Legs (Part G) into the

Headboard (Part A) and Footboard (Part B) using one

Washer (Part K) for each Corner Leg.

Screw the bolts (Part H) half way into the Headboard and

Footboard. Hang the Siderails (Part C) from the bolts then

tighten the bolts using the hex key (Part J).

Insert the Center Support into the brackets on the Head-

board and Footboard.

Roll out the Wood Slat System (Part D) and secure it in

place with 9 screws (Part I) using the pre-drilled holes and

a phillips screwdriver.

Your Platform Bed is now completely

set up and ready for use.