Instructions / Assembly

A. Headboard and Footboard (2 pcs)

D. Center Support (1 pc)

E. Wood Slat System (1 pc)

B. Side Rail (2 pcs) C. Corner Leg (4 pcs)

F. Center Leg (3 pcs)

Platform Bed

Contains One (1) Bed and Hardware

IMPORTANT NOTE:

Carefully remove all the parts from the box. Arrange on a at

surface and verify you have all of the following parts and hardware.

PARTS LIST

HARDWARE LIST

(Continued on back)

J. 16mm Screw

(2 pcs)

K. 32mm Screw

(9 pcs)

I. Large Hex Key

(1 pc)

G. 40mm Bolt

(3 pcs)

H. Small Hex Key

(1 pc)

TOOLS REQUIRED:

Phillips Screwdriver

PAGE 1
Platform Bed Contains One (1) Bed and Hardware IMPORTANT NOTE: TOOLS REQUIRED: Carefully remove all the parts from the box. Arrange on a flat surface and verify you have all of the following parts and hardware. Phillips Screwdriver PARTS LIST A. Headboard and Footboard (2 pcs) D. Center Support (1 pc) B. Side Rail (2 pcs) C. Corner Leg (4 pcs) F. Center Leg (3 pcs) E. Wood Slat System (1 pc) HARDWARE LIST G. 40mm Bolt (3 pcs) A H. Small Hex Key (1 pc) I. Large Hex Key (1 pc) J.
PAGE 2
ASSEMBLY INSTRUCTIONS STEP 1 STEP 2 A C H G D I F Attach the Corner Legs (Part C) to the Headboard (Part A) and Footboard (Part A) by rotating the legs clockwise until tightened. Attach the Center Legs (Part F) to the Center Support (Part D) using 40mm Bolts (Part G) and secure with the Small Hex Key (Part H). STEP 3 Attach Side Rails (Part B) to the Headboard and Footboard by sliding the brackets on the Side Rail onto the bolts of the Headboard and Footboard.