Instructions / Assembly

A. Headboard

(1 pc)

B. Footboard

(1 pc)

E. Crossbar

(2 pcs)

D. Center Support

(1 pc)

C. Siderail

(2 pcs)

F. Support Leg

(4 pcs)

G. Wood Slat System

(1 pc)

Platform Bed

Contains One (1) Bed and Hardware

IMPORTANT NOTE:

Carefully remove all the parts from the box. Arrange on a at

surface and verify you have all of the following parts and hardware.

PARTS LIST

HARDWARE LIST

(Continued on back)

J. 40mm Bolt

(2 pcs)

K. 60mm Bolt

(2 pcs)

L. Hex Key

(1 pc)

I. 25mm Bolt

(6 pcs)

H. 20mm Bolt

(12 pcs)

SIZE: DB

PAGE 1
Platform Bed Contains One (1) Bed and Hardware IMPORTANT NOTE: Carefully remove all the parts from the box. Arrange on a flat surface and verify you have all of the following parts and hardware. SIZE: DB PARTS LIST A. Headboard (1 pc) D. Center Support (1 pc) B. Footboard C. Siderail (1 pc) E. Crossbar (2 pcs) (2 pcs) F. Support Leg (4 pcs) G. Wood Slat System (1 pc) HARDWARE LIST H. 20mm Bolt (12 pcs) A I. 25mm Bolt (6 pcs) J. 40mm Bolt (2 pcs) K. 60mm Bolt (2 pcs) L.
PAGE 2
ASSEMBLY INSTRUCTIONS STEP 1 STEP 2 H H H Attach the Siderails (Part C) to the Headboard (Part A) and Footboard (Part B) using 20mm bolts (Part H). STEP 3 Attach the Crossbars (Part E) to the Siderails using two 20mm bolts (Part H) for each Crossbar. STEP 4 K I J Install the Center Support (Part D) by inserting one 60mm bolt (Part K) through the Crossbar and Center Support at both ends of the bed. Then screw the end of each 60mm bolt into a Support Leg (Part F).