User's Manual
Table Of Contents
- 1 Welcome
- 2 Intended Use
- 3 Contraindications
- 4 Safety Information
- 5 Symbol
- 6 System Contents
- 7 System Overview
- 8 Navigating the Device Screens
- 9 Operation
- 10 Device Alert
- 11 Troubleshooting
- 12 Cleaning and Maintaining
- 13 Maintenance
- 14 Storage and Disposal
- 15 Specification
- 16 EMC Declaration
RXiBreeze PAP System User Manual
10
structure, pneumatic system, hardware system and software system. Each part is
composed of multiple functional modules.
Pneumatic system
Figure 1 shows the pneumatic system, which includes four parts: gas supplies,
humidifier and breathing system.
Figure 1-Pneumatic system
7.1 Placing the Device
Place the device on a firm, flat surface somewhere within easy reach of where you will
use it at a level lower than your sleeping position. Make sure the device is away from
any heating or cooling equipment (e.g., forced air vents, radiators, air conditioners).
Note: When positioning the device, make sure that the power cable is accessible
because removing power is the only way to turn off the device.
CAUTION:
Make sure the filter area on the side of the device is not blocked by bedding,
curtains, or other items. Air must flow freely around the device for the system to
work properly.
Do not place the device directly onto carpet, fabric, or other flammable materials.
Do not place the device in or on any container that can collect or hold water.
Do not contact the metal surface of the heater when pulling out the water tank.
7.2 Supplying AC Power
Complete the following steps to operate the device using AC power:
1. Plug the socket end of the AC power cord (included) into the power supply (also
included).
2. Plug the pronged end of the AC power cord into an electrical outlet that is not
controlled by a wall switch.