User's Manual
Table Of Contents
- 1 Welcome
- 2 Intended Use
- 3 Contraindications
- 4 Safety Information
- 5 Symbol
- 6 System Contents
- 7 System Overview
- 8 Navigating the Device Screens
- 9 Operation
- 10 Device Alert
- 11 Troubleshooting
- 12 Cleaning and Maintaining
- 13 Maintenance
- 14 Storage and Disposal
- 15 Specification
- 16 EMC Declaration
RXiBreeze PAP System User Manual
11
3. Plug the power supply cord’s connector into the power inlet on the side of the device.
4. Verify that the plug at the side of the device, at the power supply, and at the electrical
outlet are fully inserted.
5. When turning off the device Press Therapy On/Off Button, the device will stop work.
6. Disconnecting Network power source.
WARNING:
During use if the power cord is disconnected or a power failure, the device buzzer
alarm beeps. Please stop using it and check the power status.
Please do not contact with the DC in connector when it was broken.
Please avoid arcing, wiggling, or dropping the power supply on hard surfaces.
Please periodically inspect electrical cords and cables for damage or signs of wear
and to discontinue use and replace if damaged.
Please first check the DC connector could be used normal and not breaking free.
Never place the power cord around the neck.
Do not use any small parts to fix power cord in position as they might be accidentally
swallowed.
7.3 Connecting the Breathing Circuit
To use the system, you need the following accessories in order to assemble the
recommended breathing circuit:
Resvent interface (nasal mask or full face mask) with integrated exhalation port.
Resvent flexible tubing, 1.8 m.