User's Manual

RXiBreeze PAP System User Manual
23
 Alert 2: Red bottom white tips, blue-ray flashing, with sound, exclusive alarm until
the user opens the alert to confirm or press the Therapy On/Off key.
 Notification: White reminder message, no light, no sound, after the
corresponding process, the message automatically disappears.
Alert Summary Table: The following table summarizes the alerts.
Alert
Type
Possible Cause
Action
Input voltage is
abnormal, please
check!
Alert 2
Power Adapter with the
wrong type, resulting in
voltage is too high or
too low
Use the Power
Adapter provided by
Resvent.
SD card write/read
underway, do not
remove the SD
card, do not cut off
the power.
Notification
1. Insert SD card
during data
synchronization;
2. Input the
configuration on the
SD card.
No action.
SD Card Removed.
Notification
1. No SD card in the
device.
2. SD card has been
removed.
Reinsert functional
SD card.
SD Card Full,
Please replace the
SD Card.
Notification
In Standby mode, SD
card storage space
only 200M
Replace the SD card
or clean the data after
export the data in the
SD card.
SD card can’t be
written, please
unlock and insert
again.
Notification
The SD card is
read-only and can’t be
written.
Remove the SD card,
unlock and insert it
again.
SD card error,
please remove and
insert again.
Notification
SD card failure, may
be: 1.SD card can’t
read and write.
2.SD card read and
write data errors.
Remove SD Card,
Reinsert or replace
with a new card.
Non-original
card,continue using
please format.
Notification
Insert other device' SD
card in non-service
mode.
Format the SD card in
your computer and
then insert it to
device.