User's Manual

D. Repeat the above steps if you need to pair more call
buttons
A. Select the desired ringtone first
B. Press and hold Ringtone【 】 and Setting keys【 】at the same
time for 5s, there is a “di” sound and enter the setting mode
C. Press the call button, the receiver produce “di” “di” sound
D. Press the call button again, the receiver produce a “di” sound, the
pairing is completed
E. Repeat the above steps if you need to pair more call buttons
Note: If there is no operation within 20 seconds or short press any key
of the receiver after entering the pairing mode, the receiver will
exit pairing mode.
1. Press Ringtone key【 】 for 1s, select the ringtone in sequence, it
plays the current ringtone every time you press the key
2. Press and hold the Ringtone key 【 】for 5s, the ringtone will be
selected in reverse order
Note: When you change the ringtone, please make sure the interval
between each press of the ringtone key is more than 3s
Press the Volume button【 】 for 1s to cycle through the volume
settings
Note: The volume will be automatically adjusted to the maximum when
you re-power the receiver.
1. Press and hold the Setting key【 】 to power on the receiver
2. Release the Setting key after seeing the receiver LEDindicator flashes
continuously and rapidly, all paired call
buttons are removed, the
factory reset is completed.
Pairing with Specific Ringtones
Volume Setting
Factory Reset
Ringtone Setting
Specifications
Receiver
Call Button
Frequency
Power
Input voltage
Working Current
Stand-by Current
Maximum Volume Decibel
Ringtone
Number of Pairable Call Button
Shell material
Operating Temperature
Working Humidity
Size
Frequency
Battery
Indicator Light Color
Key
Range
Waterproof Grade
Size
AM 433.92MHz
12V/27A Alkaline Battery
Red
Red Silicone Key
40M(indoor),60M(open area)
Life Waterproof (IP52)
φ44*14mm
AM 433.92MHz
＜0.5W
AC100~240V50~60Hz
＜15mA
＜1mA
100dbm (4 levels)
32
20
ABS
-20~55ºC
20~95%
64*64*54.5mm
1
2
3
4
5
6
7
8
9
10
11
12
1
2
3
4
5
6
7
02 03