Technical data

Settings
8
Set-up menu
Press the menu button. The display shows the main menu.
Press the select button next to the corresponding menu
item.
The set-up menu is shown in the display.
Use the arrow buttons (up/down) to view the available set-
ting parameters.
All available parameters for the function in question are shown in
the display.
Press the select button located next to the setting to be
changed until the desired setting option is being dis-
played.
The display shows the current setting.
or
When entering numbers, press the select button next to
the corresponding line.
The cursor blinks.
Use the arrow buttons (up/down) to change the settings. The display counts up or down.
As for settings with more than one digit or character, you
can move the cursor by pressing the arrow buttons
(left/right).
The selected cursor position blinks.
To complete the entry of numbers, press the select button
next to the corresponding line again.
The selected cursor position stops blinking.
To complete the entry, press the stop button several
times.
The display resumes the initial state.