Technical data

Call forwarding
28
Press the select button next to the menu item to be
changed.
The cursor is positioned on the entry point.
Use the arrow buttons (left/right) to select the desired
entry position and conduct changes by pressing the ar-
row buttons (up/down).
The display shows the current setting.
or
To enter the destination number, set the first number
using the arrow buttons (up/down).
The display shows numbers and special characters. The special
characters stand for:
~ = Wait for dialling tone / 3 sec. pause
i = Intern (for telephone systems)
F = Flash (for telephone systems)
Use the arrow button (right) to go to the next entry point
and enter further numbers.
The cursor moves to the next entry point.
If you need to move the cursor to the left, e. g. to overwrite
a number, you can do that by pressing the arrow button
(left).
The cursor moves to the left side.
In order to use a telephone number from the electronic
telephone book, press the select button next to the “insert”
symbol.
The telephone number is inserted at the left side of the cursor
position.

Search for the name as described under “Searching for
entries” and select the desired entry.
To insert a character, press the button for the secondary
function and the arrow button (down) consecutively.
A blank is inserted at the left side of the cursor position.
To erase a character, move the cursor to the position in
question and press the select button next to the “delete”
symbol.
The character at the current cursor position is erased.