PRECAUTIONS 1. Refer service to qualified technicians only. 2. Do not disassemble or modify the transceiver for any reason. 3. Do not expose the transceiver under direct sunlight long time or to extremely hot condition 4. Do not place the transceiver on the unstable surface. 5. Keep the transceiver out of dust, moisture,and water. $. Do not operate the transceiver or charge the battery pack under explosive conditions.
Reviser MORE OPTIONAL ACCESSORIES OF REVISER eI 6 1 programming cable kt “Throat mic Note: For more information, Please visit our website: www revisionism Reviser UNPACKING AND CHECKING EQUIPMENT Carefully unpack the transceiver. We recommend that fou identify the items listed in the following table before discarding the ing material. If any Items are missing or have bean damaged during shipment, please contact the dealers immediately.
Reviser CHARGING THE LI-ION BATTERY PACK Please chars the new bestiary pack before using it The new or stored (more than two months) battery pack, which can not reach Its full capacity for the first charging. After 2 or 3 times charging and discharging, it can reach full charge. JUST SEE THE FOLLOWING INSTRUCTIONS 1. Plug the adapter Into an electric socket. 2. Insert the transceiver or battery into the drop-in charging tray. 3.
Reviser INSTALLING BELT CLIP If the belt clip is not installed, its mounting location may get hot during continuous transmission or under heated environment. Ha beta! is not installed, its mounting location nay ot during continuous transmits on or under heats environment. INSTALLING THE (OPTIONAL) SPEAKER/MICROPHONE Insert the speaker/microphone plugs inch the speaker/microphone Jacks of the transceiver. Note: transceiver is not fully water resistant when using eater GETTING AC QUAINTER A.
OPERATION WALKIES TALKIE WRITE FREQUENCY SWITCHING POWER ON/OFF OPERATION PROCESS Turn the power switchover control SYSTEM REQUIREMENTS clockwise. You will hear a beep and speech, indicating the transceiver is ON. Operating S stem ‘Windows, Windows Me, Windows XP, Windows?, Windows Hard Disk Space: At least TOMB of available . The mum memory: 64M INSTALL THE WRITE FREQUENCY LINE DRIVER 1. Find the write line drive which your system corresponded to 2.
WRITE FREQUENCY SOFTWARE OPERATING PROCESS 1. Find the software settings, ‘communication port, to ensure the communication port on pon and computer connection port consistent (Inconsistent well not read frequency) to solve the related problem In the menu to find reading that appears can reading! 3.
Reviser ADDITIONAL FUNCTIONS SQUELCH LEVEL The purpose of Squelch is to mute the speaker when no signals are present (Squelch OFF). With the squelch lave! correctly set, you will hear sound only while actually receiving signals (Squelch ON). The squelch level can be adjusted via program software. TIME-OUT TIMER Ton The purpose of the Time-out Timer is to prevent any caller from using a channel for an extended period of time which will cause thermal damage.
‘When a signal Is received or an operation Is performed, Battery Saver tums OFF. BATTERY LOW ALERT Battery Low Alert reminds you of recharging When the battery power is very low, an alert tone will sound and the LED indicator will blink red. Please recharge or replace the battery pack. MONITOR ‘When you are receiving and no signals present, the squarish function can mute the speaker, so you can not hear the background noise. you want to switch the squelch function OFF, press and hold [MINI] button.
SPECIFICATIONS WARRANTY CARD Fraulein Lance. KATHIE RE Riot Pac ow Cranial Contact ia Opened Vote an Definitions irs Breve Sen Wake A505 Nita: All specifications are subject fo change without notice. TROUBLESHOOTING GUIDE Tr iE ePe RSE, ERST IS nie wns | ET SER Nina ho Avalon fom ohm mR La hoa vol Bhi RIE more cat B00 3. te Bh Rts St 50 Rk Inn | se tune oma Warranty Remarks: 1: Tha consumer keeps the warranty card as the proof for repairing. 2 The card is of validity with he stamp and date 3.