User's Manual

RF Exposure Compliance and Control Guidelines and

Operating Instructions

To control your exposure and ensure compliance with the

occupational/controlled environment exposure limits, always

adhere to the following procedures.

•During transmissions, your radio generates RF energy that can

possibly cause interference with other devices or systems. To

avoid such interference, turn oﬀ the radio in areas where signs are

posted to do so.

•DO NOT operate the transmitter in areas that are sensitive to

electromagnetic radiation such as hospitals, aircraft, and blasting

sites.

•Portable Device, this transmitter may operate with the

antenna(s) documented in this ﬁling in Push-to-Talk and

body-worn conﬁgurations. RF exposure compliance is limited to

the speciﬁc belt-clip and accessory conﬁgurations as document-

ed in this ﬁling and the separation distance between user and the

device or its antenna shall be at least 2.5 cm.

•Mobile Device, during operation, the separation distance

between user and the antenna subjects to actual regulations, this

separation distance will ensure that there is suﬃcient distance

from a properly installed externally-mounted antenna to satisfy

the RF exposure requirements.

•Occupational/Controlled Radio, this radio is designed for and

ti gninaem ,”ylnO esU dellortnoC/lanoitapuccO“ sa deﬁissalc

st be used only during the course of employment by

individuals aware of the hazards, and the ways to minimize such

hazards; NOT intended for use in a General population/uncon-

trolled environment.

•General population/uncontrolled Radio, this radio is designed for

.”esU dellortnocnu/noitalupop lareneG“ sa deﬁissalc dna