Instructions / Assembly

ManualsBrandsRetractable Bug Screen ManualsDoors & Windows23 in. x 52 in. Adjustable Width/Height Bronze Aluminum Fiberglass Vertically Retractable Window Insect Screen/Frame

EASY

INSTALL

RETRACTABLE INSECT SCREEN

FOR WINDOWS

RetractableBugScreenTM - For Window Openings

- Unica Model Series (Vertical Pull-Down Retractable Window Screen with External Handles)

- with Patented SUNOX ANTI-BACTERIAL Screen

CONTENTS

III

VII

VIII

Tools Required

Part & Hardware LIST

Parts Identification

Hardware Identification

Preparation

Installation OVERVIEW

QUICK INSTALL GUIDE

- For Experienced Handypersons

DETAILED INSTALLATION INSTRUCTIONS

- For Beginner Do-It-Yourselfers

Warranty

Troubleshooting &

Frequently Asked Questions (F.A.Q.)

Use & Care

WATCH THE INSTALLATION GUIDE VIDEO

SEE TIPS & GUIDANCE for EASY ASSEMBLY & INSTALLATION

Click link to view video

https://www.youtube.com/watch?v=3v0fAe30kJQ&feature=youtu.be

WE MAKE IT EASY - CALL 1-407-450-5134

Live Assistance even SATURDAYS!

Monday - Saturday 9:00 a.m. - 6:00 p.m. EST or email ANYTIME:

customerservice@retractablebugscreen.com for assistance or to

request chat with a LIVE U.S. based representative.

CHOKING HAZARD - Small Parts

Not for children under 12 years of age.

ADULT assembly required.

WARNING

WE RECOMMEND that the INSTRUCTIONS be READ COMPLETELY BEFORE INSTALLATION and if

possible the 10 minute INSTALLATION VIDEO be viewed at https://youtu.be/3v0fAe30kJQ

This Installation Guide has been Do-It-Yourself User tested and thoughtfully designed

to provide you with a positive installation experience.

Need Help? Visit Retractablebugscreen.com or Call 1-407-450-5134 to talk to a live representative.

RETRACTABLEBugScreen TM Inc.

256 Fairway Pointe Circle, Orlando, FL

32828 U.S.A.

www.retractablebugscreen.com

WE MAKE IT EASY - CALL 1-407-450-5134

Live Assistance even SATURDAYS!

Monday - Saturday 9:00 a.m. - 6:00 p.m. EST or email

ANYTIME: customerservice@retractablebugscreen.com

for assistance or to request chat with a LIVE U.S. based

representative.

www.retractablebugscreen.com

No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by

any means without the prior written permission of the publisher.

For information address RETRACTABLEBugScreen Inc. at customerservice@retractablebugscreen.com

Summary of content (28 pages)

PAGE 1
www.retractablebugscreen.
PAGE 2
Dear Valued Customer, Thank You for choosing an RBS Quality Retractable Bug Screen. We are committed to ensuring your FULL satisfaction. We strive to earn your customer loyalty by fulfilling all your expectations for our product. Should you have any assembly challenges, need troubleshooting help or have any questions, it will be our pleasure to provide assistance and help you build and enjoy our product.
PAGE 3
I. TOOLS REQUIRED ASSEMBLE RECOMMENDED TOOLS 1. Drill 2. Metal File* 6. Measuring Tape 3. Drill Bits** 7. Handsaw 4. Pencil 8. Cutter 5. Pliers 9. Screwdriver (Phillips) * NOTE: Metal File is optional yet handy for adjustments required by disparities caused by irregular or not level window sills or to file away metal irregularities or burrs. ** Use 5/32 in.(3.97mm) (drill bit for metal) Use 7/32 in.(5.56 mm) (drill bit for masonry) II.
PAGE 4
III. PARTS IDENTIFICATION RTA NT ! T PO AN IM A2 (the Pull Bar) has already been FACTORY INSTALLED into A1 (The Screen Cartridge Header). The 2 main different components of Part A; A1 and A2 are identified as A1 and A2 in instruction illustrations merely to make installation instructions of RetractableBugScreen TM easier to understand and successfully follow.
PAGE 5
V. PRE-ASSEMBLY and INSTALLATION PREPARATION RETRACTABLEBugScreenTM (RBS) Unica Model Series - is designed for installation INSIDE of the window jamb, on either the interior or exterior side of the window. It is easy to assemble, requiring just two cuts. Please check your RBS KIT Model is correct size for your window opening. Various RBS kit models will accommodate window openings from 15 to 73 inches wide, to a maximum of 52 or 67 inches high depending on RBS kit model.
PAGE 6
If you DO NOT have the 2 inches (5.08 cm) of space in your HEAD JAMB you need to install the Screen Cartridge Header A(A1/A2), you can still install the retractable insect screen, however you will need an alternate installation accessory kit, such as our Frontal Installation accessory kit available by contacting us at; customerservice@retractablebugscreen.com or call us at 1-407-450-5134 V.3.
PAGE 7
VI. ASSEMBLY & INSTALLATION OVERVIEW In order to install this Retractable Insect Screen for your Window you execute 3 main steps: MEASURE AND CUT THE MOSQUITO SCREEN HEADER 1 Measure the width of window opening HORIZONTALLY; also known as the window's HEAD JAMB width.
PAGE 8
ALIGN Figure 1.2A STEP 1.2. Align Screen Cartridge Header (A1) and Screen Pull Bar (A2) and Cut at your pre-measured “Width” inches mark. 1.2.1. Ensure that the Screen Cartridge Header (A1 ) and Screen Pull Bar (A2) are aligned so they can be cut evenly at the same time.so as to be able to cut them both evenly at the same time. (See Figure: 1.2A) MARK Figure 1.2B 1.2.2. On the Screen Cartridge Header (A1) you will find a Glued Measuring Tape Template (N) pre-adhered to the Screen Cartridge Header (A1).
PAGE 9
1.3.6. Take the 2 x (D) (Pull Bar End Caps) parts which are still attached by plastic to distinguish the right and left parts. Push the Left Pull Bar End Cap (D) into the end of the Pull Bar (A2). (See Figures: 1.3.6A, 1.3.6B and 1.3.6C) Figure 1.3.7A The Installation Video clearly shows how to separate the 2 Pull Bar End Caps (D), cleanly. You can view it in Section 1 of the Installation Video: MEASURING AND PREPARING THE MOSQUITO SCREEN HEADER at url: https://www.youtube.
PAGE 10
The Cone Spring (H) is intended to remain loose, as the function of the Cone Spring (H) is merely to provide leeway and give for the End Cap of the Screen Cartridge Header, as the End Cap and the Cone Spring (H) work together to provide a flexible give and take for the Screen Cartridge Header (A1) when the Screen Cartridge Header (A1) is inserted in the upper recess of the Window jamb. Figure 1.3.10C With Cone Spring (H) positioned as described in Step 1.3.10 and seen in Figure 1.3.
PAGE 11
RTA NT ! T PO AN IM 2.2.2. Unroll the enclosed paper Measuring Tape (K) and place its 67 inch mark at the top extremity of the Lateral Insect Screen Track (J) WITH the black brushweatherstrip. (See Figure 2.2.2A, and right side of Figure 2.2.2B) Fold the remaining 1/4 inch of tape so it falls down the top extremity side of Lateral Insect Screen Track (J). See Figure 2.2.1B. IMPOR T MARK CUT Figure 2.2.2A Figure 2.2.2B Unica A-7 Modification: USE this modification ONLY for Model Unica A-7.
PAGE 12
! T ! T RTA NT AN IM IMPOR PO Figure 2.4.2 T IM 2.4.2. With pliers pinch both ends of the Lateral Insect Screen Tracks (J) where the brushweatherstrip lies. (See Figure 2.4.2.) RTA NT AN PO IMPOR T You MUST pinch the small metal channel that holds the brushweatherstrip, against the brushweatherstrips in such a way as to secure the brushweatherstrips and PREVENT them from moving.
PAGE 13
3.1.2. Install the Lateral Insect Screen Tracks (J) Ensure that the Lateral Insect Screen Track (J) brushweatherstrip side is facing the interior of the window opening. That is; facing the side screen track on the opposite side of the window. (See Figure 3.1.2A) Ensure that the Side Insect Screen Stopper (L) is in position. The Right Lateral insect Screen Track should have the Stopper (L) in the Right Channel.
PAGE 14
VIII. ASSEMBLY & INSTALLATION DETAILED INSTRUCTIONS STEP 1: MEASURING AND PREPARING THE MOSQUITO SCREEN HEADER Figure 1A STEP 1.1. Measure the width the INSIDE HEAD JAMB MEASURE Use your household tape to Measure the width of the inside jamb of your window at the Head Jamb level. See Figure 1A and 1B. Record the measurement you took in Step 1.1. as the window Head Jamb opening width = W inches.
PAGE 15
STEP 1.2. TIPS Note you should be cutting the Screen Cartridge Header (A1) and Pull Bar (A2) evenly all at the same time.(See Figure 2B). (Please note you will be also be cutting the insect screen roll housed in the interior of the Screen Cartridge Header as well as the Header's metal frame; so expect the cutting to be through a thick density). RTA NT ! T PO AN IM USE a handsaw or an Electric Saw to CUT the Screen Cartridge Header A ((A1) and integrated Pull Bar (A2)).
PAGE 16
The reason you MUST ONLY USE the included Glued Measuring Tape Template (N) adhered to the top of Screen Cartridge Header (A1) as your CUTTING REFERENCE, is that the factory Glued Measuring Tape Template (N) was designed to INCLUDE a MEASUREMENT CALCULATION that makes allowances for the space you will need in the Head Jamb for the WIDTH of the Screen Cartridge Header A(A1/ A2) AND the add-on END caps (E) and (I). STEP 1.3.
PAGE 17
1.3.8. Pick up the Screen Cartridge LEFT End Cap (E) and the Brake Mechanism (F) in the hardware component box. Figure 1.3.8A Insert the Brake Mechanism (F) onto the Screen Cartridge LEFT End Cap (E) by inserting the Brake Mechanism (F) on the protruding round post in the Screen Cartridge LEFT End Cap (E). Rotate the Brake Mechanism (F) onto the post in the Screen Cartridge LEFT End Cap (E) while applying a slight push pressure on the Brake Mechanism's (F) spring. (See Figure 1.3.8A) Figure 1.3.
PAGE 18
STEP 1.3.
PAGE 19
Ensure both Lateral Insect Screen Side Tracks (J) are ALIGNED. See Figure 2.2.1A Figure 2.2.1A Lateral Insect Screen Side Tracks (J) are about 65 inches long. The black brushweatherstrip at about 63 inches long, is SHORTER than the Lateral Insect Screen Side Track (J) because in addition to the black brushweatherstrip, the Lateral Insect Screen Track (J) must ALSO accommodate a Lateral Track Insect Screen Stopper (L).
PAGE 20
STEP 2.2 TIPS You may temporarily tape the Lateral Insect Side Tracks (J and J) together while you are cutting them to minimize their movement while you are cutting, and to ensure maintaining their alignment while you are cutting. The enclosed Measuring Tape (K) should be layed onto atop the Lateral Insect Screen Track (J) to act as a Cutting Reference Guide, as shown in Figure 2.2.2B.
PAGE 21
the brushweatherstrip is absent for the last 2 inches. That space will be filled by End Stoppers (L) ). RTA NT ! T PO AN IM GIVE your brushweatherstrips a FORCEFUL PINCH. It is critical that the brushweatherstrip channel be FORCEFULLY PINCHED so as to ENSURE that the BRUSHWEATHERSTRIP CANNOT MOVE. To Test that the brushweatherstrips DO NOT MOVE, your fingertip should be able to run up and down the brushweather strip WITHOUT MOVING the brushweatherstrip at all.
PAGE 22
RTA NT ! T PO AN IM STEP 3.1. INSTALLING the HEADER and LATERAL TRACKS into WINDOW IMPOR T 3.1.1. Insert the Screen Cartridge Header (A1) into the top of the window opening by first inserting the side without the Cone Spring (H) into the top of the window opening and then pushing the other side into position while exerting lateral pressure against the Screen Cartridge Header (A1) until the Screen Cartridge Header (A) is seated into position. (See Figure 3.1) Figure 3.
PAGE 23
Be careful to center the Lateral Insect Screen Track (J) onto the appendage from the Screen Cartridge Header (A) so as to be able to guide the Lateral Insect Screen Track (J) to be pushed evenly into a parallell position to the wall or window sides. Move the Lateral Insect Screen Tracks (J) vertically so that they move INTO the window jamb opening Make sure Lateral Insect Screen Tracks (J) insert completely. (See Figure 3.1.2D) Figure 3.1.2D A J REPEAT step 3.2.3.
PAGE 24
IX. WARRANTY Our RetractableBugScreen TM brand on the box confirms that the RETRACTABLE Insect Screen you have purchased is made with world class craftsmanship and premium materials. Each RETRACTABLEBugScreen TM product is designed to provide you with enduring performance and value. We put that promise into writing in our Warranty. 2 - Year LIMITED WARRANTY 1. RETRACTABLEBugScreen Inc.
PAGE 25
X. TROUBLESHOOTING GUIDE & FREQUENTLY ASKED QUESTIONS (F.A.Q.) Please see our website http://www.retractablebugscreen.com for a constantly updated troubleshooting guide 1. 2.
PAGE 26
6. Can the screen be repaired if it ever tears? Yes, the screen can be repaired with our Screen Repair Kit. You can order the Screen Repair Kit by contacting us at: customerservice@retractablebugscreen.com or call us at 1-407-450-5134. 7. If the screen derails out of the Lateral Insect Screen Side Tracks, because of strong winds or movement, can that be addressed? Yes it can be addressed.
PAGE 27
XI. USE & CARE GUIDELINES Please see our website http://www.retractablebugscreen.com for additional and updated Use & Care Guidelines. The screen mesh is usually retracted when not in use so as to allow clear view of outside. The insect screen stays in the Screen Cartridge Header housing during wet and cold months, when windows are not opened often and during periods when interiors are air-conditioned and windows are left closed for long periods of time.
PAGE 28
and extend the life of the mesh. Ensure Lateral Insect Screen Side Tracks (J) are kept free of dirt, grease and debris. Clean mesh screen, Lateral Insect Screen Side Tracks and Pull Bar Exterior with water, mild cleaning product and a soft damp cloth – not with harsh chemicals or a pressure washer. Allow mesh screen to dry before rolling it back up into its Header housing.