Installation Manual

Check the parts shown here, this model has different requirements than the standard parts.
STEP 1: Remove the bolts from existing Utili-track
rails and attach brackets
STEP 2: Lift the assembled cover into the bed
and position rails

FOR STEP 7 IN STANDARD INSTRUCTIONS:
To decrease the distance between the rails you add
spacers next to the nylon washers between the RETRAX
rail and the rail bracket. To increase the distance between
the rails you remove washers or use thinner washers in
place of the nylon spacers.
STEP 3: Attach RETRAX rails to rail brackets


RETRAX 








Frontier King Cab

Frontier Crew Cab

WITH Utili-track: WITHOUT Utili-track:
The Frontier with no Utili-track
uses the clamps below.
1/8” gap
Tailgate
Protector
Tailgate





  
  
  
  
  
  
Follow standard instructions through step 3, (pg. 2) then refer back
to this guide on how to install mounting hardware.
A
B
C
D
E
F
Check the parts shown here, this model has different requirements than the standard parts.
STEP 1: Remove the bolts from existing Utili-track
rails and attach brackets
STEP 2:
Lift the assembled cover into the bed
and position rails
FOR STEP 7 IN STANDARD INSTRUCTIONS:
To decrease the distance between the rails you add
spacers next to the nylon washers between the RETRAX
rail and the rail bracket. To increase the distance between
the rails you remove washers or use thinner washers in
place of the nylon spacers.
STEP 3: Attach RETRAX rails to rail brackets


RETRAX 










Frontier King Cab

Frontier Crew Cab

WITH Utili-track: WITHOUT Utili-track:
The Frontier with no Utili-track
uses the clamps below.
1/8” gap
Tailgate
Protector
Tailgate





  
  
  
  
  
  
Follow standard instructions through step 3, (pg. 2) then refer back
to this guide on how to install mounting hardware.
A
B
C
D
E
F
Continue with the standard
instructions on Page 2.
Continue with the standard
instructions at step 6 (Pg. 4)
8
Nissan Frontier 2005-up Installation