Owner's Manual

9
www.retromanufacturing.com
Attaching the InfiniMount Brackets
Step #3 Attach the InfiniMount Brackets.
Parts Needed
M Left InfiniMount Bracket x(1)
M
N
K
K
N Right InfiniMount Bracket x(1) K InfiniMount Screws x(8)
Attach both InfiniMount Brackets(M,N) to Radio Motor using the supplied
InfiniMount Screws(K) (the brackets are marked with an “L” for left and
an “R” for right). Make sure the RetroSound® logo on the Radio Motor
is facing upwards. Before tightening the screws, you may also move the
brackets forward, backward, up, or down as needed. The InfiniMount
Brackets may be rotated, cut, or bent to achieve the perfect fit. A minimum
of two screws must be used on each bracket to secure them correctly.