Owner's Manual

12
[e-mail]
15A FUSE
SPEAKER OUTPUTS
POWER OUTPUTS
SIRIUSXM INPUT
Locate the three wiring harnesses: Main Wiring Harness(G), Speaker
Harness(H), and Power Harness(I) from your Radio Motor box. Using the
Power Harness and Speaker Harness, connect the bare wire ends of your
power and speaker wires to the appropriate power and speaker locations
in your vehicle (see wiring diagram included in your Radio Motor box).
Then connect the Main Wiring Harness to the back of the Radio Motor.
Do not connect the Speaker and Power Harnesses to the Main Wiring
Harness until Step #7.
If you find this step too difficult, consult with a local audio installation pro-
fessional, or contact us at [e-mail] for assistance.
Wiring the Radio
Step #6
Connect the Wiring Harness
Parts Needed
H Speaker Harness x(1) I Power Harness x(1)
G Main Wiring Harness
x(1)
Your connections
will vary depend-
ing on the unit
purchased. Refer
to the wiring dia-
gram included in
your Radio Motor
box for specific
connections.