Owner's Manual

5
www.retromanufacturing.com
PLEASE OBSERVE THESE PRECAUTIONS WHEN INSTALLING
AND USING THIS UNIT:
This user’s manual does not cover all possible installation scenarios.
Please be sure to follow the instructions carefully while attempting
installation. If you feel you cannot install this unit yourself, consult with a
local car audio professional.
Retro Manufacturing, LLC is not liable for any problems resulting
from improper installation of the unit.
If you have questions about installing your radio, contact us at tech@
retromanufacturing.com or by calling 888.325.1555.
• If the unit does not turn on, check all wiring first. Then check the
fuse in your vehicle’s fuse panel and the fuse at the unit’s wiring
harness. If either fuse has failed, eliminate the cause of the failure,
and replace the fuse with one prescribed for this unit.
• Do not disassemble or modify the unit or attempt to repair it
yourself. If the unit needs to be repaired, consult your dealer or
Retro Manufacturing, LLC.
• This unit is not designed for a marine environment. Please do not
use the unit where it will be exposed to moisture or excessive dust.
Exposure to moisture will damage the unit and void your warranty.
• Use caution when routing wiring and cables to prevent them from
being caught in the vehicle chassis, or damaged by screws or
moving parts, such as seat rails.
• Cutting the main wiring harness, antenna lead, USB or auxiliary
cables will void the warranty of your radio.
• If mounting the Radio Face or Radio Motor remotely, use extreme
caution not to damage these units’ internal parts when choosing
brackets and screws.
• Never install the unit in a location where it interferes with your field
of vision.
• Use the supplied metal backstrap to secure the rear of the unit.
Failure to secure the back of the unit will damage the shafts and
will void the warranty.
PRECAUTIONS