Owner's Manual

8
[e-mail]
E
Attaching the Radio Face
Before attaching the Radio Face ensure the RetroSound® logo on the
Radio Motor is facing upwards. Attach the Radio Face to the Radio Motor
with the four Small Screws(E).
Step #2 Attach the Radio Face.
Apache Radio Face users will need to take an additional step to
set up your radio to work in Apache Mode. Once the radio is fully
assembled, installed, and powered on, press and hold the Right-
Front knob for three seconds to access the sub-menu system. You
will see AUTO SEEK or MANUAL. Release and press the Right-
Front knob repeatedly to SEL PANEL, then rotate the Right-Front
knob clockwise to show NORMAL or APACHE panel choices. With
the APACHE panel selected, press the Right-Front knob to set.
Special Instructions for Radio Users