Owner's Manual

2221
www.retromanufacturing.com [e-mail]
SiriusXM® Instructions
For more information on SiriusXM®, please visit www.SiriusXM.com
SiriusXM® Troubleshooting
To access the sub-menu system, rotate the Right-Rear Knob(4) clockwise
once. Rotate the Right-Front Knob(3) clockwise until you see DIRECT on
the screen. Press the Right-Front Knob(3) to enter the first channel num-
ber. Rotate the Right-Front Knob(3) to set the value of the first number,
then press the Right-Front Knob(3) to accept and move to the next num-
ber. Rotate the Right-Front Knob(3) once more to set the second number
and press the Right-Front Knob(3) to confirm the selection.
Setting the Mature Channel Lock
This feature enables the ability to limit access to SiriusXM® channels with
mature content. When enabled, the Mature Channel Lock feature requires
you to enter a passcode to tune to the locked channels. The default pass-
code is 1111.
To access the sub-menu system, rotate the Right-Rear Knob(4) once. Ro-
tate the Right-Front Knob(3) clockwise until you see MATURE OFF on
the screen. Press and release the Right-Front Knob(3) to set a channel
lock code. Rotate the Right-Front Knob(3) to set the first number, then
press the Right-Front Knob(3) to accept and move on to the next number.
Repeat this process for the remaining numbers and press the Right-Front
Knob(3) to accept the final number and turn the mature lock on.
Changing the Mature Channel Lock Passcode
The Mature Channel Lock passcode can be changed by entering the cur-
rent code and setting a new one.
To access the sub-menu system, rotate the Right-Rear Knob(4) once. Ro-
tate the Right-Front Knob(3) until you see MATU CODE on the screen.
Press the Right-Front Knob(3) to enter the current passcode (default is
1111). Rotate the Right-Front Knob(3) to set the first number, press the
Right-Front Knob(3) to accept, and move on to the next number. Repeat this
process for the remaining numbers and press the Right-Front Knob(3) to
accept and enter a new code. Repeat the process above to set a new code.
Signal Strength
This Sub-Menu displays the current SiriusXM® signal strength on the
screen.
To access the sub-menu system, rotate the Right-Rear Knob(4) once. Ro-
tate the Right-Front Knob(3) clockwise until you see SIGNAL. The signal
strength will be displayed on the screen.
SiriusXM® Troubleshooting
If your SiriusXM® Connect Vehicle Tuner does not appear to be functioning
properly, and one of these advisory messages appears on the display, try
some of these troubleshooting tips.
CHK TNR (check tuner)
This message indicates an issue with your SiriusXM® Connect Vehicle Tuner.
• Check that your tuner is securely plugged into the back of the
Radio Motor.
• Check the wires between your unit and the SiriusXM® tuner for
damage.
• Check the tuner to ensure that it is not damaged.
CHK ANT (check antenna)
This message indicates an issue with your SiriusXM® antenna connection.
• Check that your SiriusXM® antenna is plugged into the tuner and
that the connection is secure.
• Check that the SiriusXM® antenna is not damaged.
• If the antenna connections are secure and the advisory message
is still displayed, turn the radio off and back on to reset the
advisory message.
BUSY (no signal)
This message indicates that your SiriusXM® tuner isn't acquiring the
audio or program information from the satellite. If this message does
not go away after a few seconds, the satellite signal is too weak at your
current location. To solve this issue:
• Make sure the antenna is mounted away from metal objects.
• Move the vehicle to a new location – especially if your vehicle is
parked underground or in a parking garage.
CH UNAVL (channel unavailable)
This message indicates that the current channel is unavailable. This error
can happen for several reasons:
• The channel may no longer be available on SiriusXM®.
• The channel may not be available with your current SiriusXM®
subscription package.
CH LOCKED (mature channel locked)
This message indicates that the Mature Channel Lock has locked the channel.
• Enter the Mature Channel Lock code.
• Tune to a channel that is not locked by the Mature Channel Lock.
• Disable the Mature Channel Lock (see page 21 for instructions).