Owner's Manual

87
www.retromanufacturing.com [e-mail]
System Settings
System Settings
The System Settings sub-menu enables access to the numerous additional
features of your RetroSound® radio. Press and hold the Right-Front Knob(3)
for three seconds to access the sub-menu. Then rotate the Right-Front
Knob(3) to cycle through the available sub-menu options. Once in a specific
sub-menu, press and release the Right-Front Knob(3) to change the options.
Auto Seek/Manual
This sub-menu toggles between Auto Seek or Manual tuning. In Auto
Seek mode, the radio will tune to the next available station when tuning.
To access the AUTO SEEK/MANUAL sub-menu, press and hold the
Right-Front Knob(3) for three seconds, AUTO SEEK will be displayed.
Press and release the Right-Front Knob(3) to select between AUTO SEEK
or MANUAL. Once the desired setting is shown, let the unit time out to set.
A Store
This sub-menu activates A STORE which will automatically fill FM presets
on all three FM bands, six presets each (eighteen total presets) with the
strongest radio stations available in your area.
To access the A STORE sub-menu, press and hold the Right-Front
Knob(3) for three seconds. Rotate the Right-Front Knob(3) until A STORE
appears on the screen. Press the Right-Front Knob(3) to activate. This
process can take up to one minute to complete.
HD On/Off (Motor 4HD Only)
This sub-menu activates HD Radio® which will automatically tune to an
HD Radio® station when available. HD Radio® is set to "On" by default.
To access the HD sub-menu, press and hold the Right-Front Knob(3) for
three seconds. Rotate the Right-Front Knob(3) until HD appears on the
screen. Press and release the Right-Front Knob(3) to select the desired
option. Once the desired setting is shown, let the unit time out to set.
HD Store (Motor 4HD Only)
This sub-menu activates HD STORE which will automatically fill FM
presets on all three FM bands, six presets each (eighteen total presets)
with the strongest HD Radio® stations available in your area.
To access the HD STORE sub-menu, press and hold the Right-Front
Knob(3) for three seconds. Rotate the Right-Front Knob(3) until HD
STORE appears on the screen. Press the Right-Front Knob(3) to activate.
This process can take up to one minute to complete.
Local/Distant
This sub-menu adjusts the sensitivity of the FM tuner. When listening to the
FM tuner, selecting LOCAL will focus the tuner in the local area, making the
signal stronger. Selecting DISTANT will broaden the signal and allow your
local stations to be listened to at a greater distance when traveling.
To access the LOCAL/DISTANT sub-menu, press and hold the Right-
Front Knob(3) for three seconds. Rotate the Right-Front Knob(3) until
LOCAL/DISTANT appears on the screen. Press and release the Right-
Front Knob(3) to select the desired option. Once the desired setting is
shown, let the unit time out to set.
Clock
This sub-menu sets the clock.
To access the CLK sub-menu, press and hold the Right-Front Knob(3) for
three seconds. Rotate the Right-Front Knob(3) until CLK appears on the
screen, then press the Right-Front Knob(3) to select. To adjust the hours,
rotate the Right-Front Knob(3) clockwise or counter-clockwise.
Adjusting past 12 will change between AM and PM. Once the hour is set,
press the Right-Front Knob(3) to adjust the minutes, rotate the Right-Front
Knob(3) to adjust. Once the desired time is shown, let the unit time out to
set.
Clock 12/24
This sub-menu changes the clock from a twelve-hour clock to a twenty-
four-hour clock. The default setting is for a twelve-hour clock (CLK 12).
To access the CLK 12/24 sub-menu, press and hold the Right-Front Knob(3)
for three seconds. Rotate the Right-Front Knob(3) until CLK 12 appears on
the screen. Press and release the Right-Front Knob(3) to select the desired
option. Once the desired setting is shown, let the unit time out to set.
Display Frequency/Clock
This sub-menu sets the screen to display either the radio station you’re
listening to, (DISP FREQ), or the current time (CLK).
To access the DISP sub-menu, press and hold the Right-Front Knob(3) for
three seconds. Rotate the Right-Front Knob(3) until DISP FREQ appears
on the screen. Press and release the Right-Front Knob(3) to select either
DSIP FREQ or DISP CLK. Once the desired setting is shown, let the unit
time out to set.
System Settings