Owner's Manual

1211
www.retromanufacturing.com [e-mail]
System Settings
Traffic Announcements
This sub-menu toggles the traffic announcements function on or off.
The traffic announcements function is part of the RDS and allows FM
stations to broadcast traffic announcements that scroll across the screen
or audible traffic alerts to your radio.
To access the TA sub-menu, press and hold the Right-Front Knob(3) for
three seconds. Rotate the Right-Front Knob(3) until TA ON/OFF appears on
the screen. Press and release the Right-Front Knob(3) to select the desired
option. Once the desired setting is shown, let the unit time out to set.
Clock Time
This sub-menu toggles the clock time feature on or off. If the radio station
supports clock time, your radio will synchronize its clock with the radio
station’s clock.
To access the CT sub-menu, press and hold the Right-Front Knob(3) for
three seconds. Rotate the Right-Front Knob(3) until CT ON/OFF appears on
the screen. Press and release the Right-Front Knob(3) to select the desired
option. Once the desired setting is shown, let the unit time out to set.
Bluetooth® On/Off (Motor 2A, Motor 2DAB, and Motor 4HD only)
This sub-menu toggles Bluetooth® on or off. Bluetooth® must be enabled
before you can connect a Bluetooth® device.
To access the BT sub-menu, press and hold the Right-Front Knob(3) for
three seconds. Rotate the Right-Front Knob(3) until BT ON/OFF appears on
the screen. Press and release the Right-Front Knob(3) to select the desired
option. Once the desired setting is shown, let the unit time out to set.
Bluetooth® Connect/Disconnect (BT must be "ON")
This sub-menu enables the radio to be discoverable on your Bluetooth®
device. Choose BT CONNEC to allow your device to connect, and BT
DISCON to disconnect Bluetooth® devices.
To access the BT CONNEC/DISCON sub-menu, press and hold the
Right-Front Knob(3) for three seconds. Rotate the Right-Front Knob(3)
until BT CONNEC/DISCON appears on the screen. To connect a device,
press and release the Right-Front Knob(3) to select BT CONNEC, then
search for “RETROSOUND” in your phone’s Bluetooth® device list. Enter
password “0000” if prompted. To disconnect a device, press and release
the Right-Front Knob(3) to select BT DISCON, then let the unit time out to
disconnect the current device.
System Settings
Area USA/EUR/AUS/JAP/RUS
This sub-menu allows you to set your area to receive the appropriate
broadcasts for your region. The default setting is the United States (USA).
To access the AREA sub-menu, press and hold the Right-Front Knob(3) for
three seconds. Rotate the Right-Front Knob(3) until AREA USA appears
on the screen. Press and release the Right-Front Knob(3) to select the
desired region (USA/EUR/AUS/JAP/RUS). Once the desired region is
shown, let the unit time out to set.
Volume Last/Adjust
This sub-menu adjusts the volume level at which the radio will turn on. The
default setting is VOL LAST, which means the radio turns on at the volume
level at which the radio was turned off. VOL ADJUS allows you to preset
the volume level at which the radio turns on from 0-46, regardless of the
volume level at which the radio was turned off (see “Volume” on page 5).
To access the VOL sub-menu, press and hold the Right-Front Knob(3) for
three seconds. Rotate the Right-Front Knob(3) until VOL appears on the
screen. Press and release the Right-Front Knob(3) to select the desired
option. If VOL ADJUS is selected, rotate the Right-Front Knob(3) clockwise
(AD VAL is shown) and press the Right-Front Knob(3) to accept. Rotate
the Right-Front Knob(3) again to adjust the level between 0-46. Once the
desired setting is shown, let the unit time out to set.
SEL Panel (Motor 1A, Motor 2A, Motor 1DAB, and Motor 2DAB only)
This sub-menu changes the operating mode between Normal (with push-
buttons) and Apache (without push-buttons).
To access the SEL PANEL sub-menu, press and hold the Right-Front
Knob(3) for three seconds. Rotate the Right-Front Knob(3) until SEL PANEL
appears on the screen. Press and release the Right-Front Knob(3) to enter
the panel choices. Rotate the Right-Front Knob(3) to select the desired op-
tion. Once the desired setting is shown, let the unit time out to set.
Software Info
This sub-menu displays the unit’s software version.
To access the sub-menu, press and hold the Right-Front Knob(3) for
three seconds. Rotate the Right-Front Knob(3) until the software version
appears on the screen (there are no adjustable settings in this menu).