Owner's Manual
Table Of Contents
9
9
INSTALLATION INSTRUCTIONS
STEP 2: Install InfiniMount Brackets
Attach each InniMount
bracket to the correct side of the radio
body using the supplied screws (the brackets are marked with
a “L” for left and a “R” for right). Before tightening the screws,
you need to adjust the brackets up, down, forward or backward
(see Figure 2). You may also rotate, cut, or bend the brackets to
achieve the perfect t. Complete the assembly with at least two
screws tightened on each side.*
*In some installations the brackets must be moved far enough forward or backwards
or rotated so that only two screws will align with the threaded screw holes
on the radio. Two screws are sufcient to hold the brackets in place.
NOTE: You may need to cut, trim or bend the brackets to achieve a perfect t. You
can even drill new mounting holes into the bracket if you need to. The InniMount
system is designed to be modied. Modifying your brackets will NOT void your warranty.
R
Figure 2 - Attach InniMount Brackets