Owner's Manual

BLUETOOTH

DEVICE INSTRUCTIONS

Bluetooth

Instructions

Bluetooth

Hands-Free and A2DP Streaming Operation

You can make or receive phone calls using a Bluetooth

enabled

phone connected to your radio, and control basic functions via the

radio interface. During a call, the radio music source will be muted

and the call broadcast through your car speaker system. You can

also listen to music stored on a A2DP enabled Bluetooth

device.

Pairing a Bluetooth

Device

When connecting a Bluetooth

device for the rst time, you must

rst pair the device with the unit. For most devices, pairing only

needs to be done once.

1. To pair your device rst make sure the Bluetooth

function is turned on in the radio sub-menu.

2. Then, change the BT DISCON function to BT

CONNEC to make your radio discoverable (ensure

Bluetooth

is enabled on your device).

3. Next, search for a new Bluetooth

device from the

phone (this may take up to 30 seconds) and select

“RETROSOUND” from the Bluetooth

device list.

4. If prompted, enter “0000” for the PIN. If successful,

“PAIRING OK” will be displayed on the LCD screen.

The paired device will then connect to your radio automatically.

On some devices, you may need to select “SET AS AUTHORIZED” or

similar to ensure your radio will automatically pair on future usage.

PAIRED NOTIFICATION DISPLAY: When the Bluetooth

device is

paired with your radio, the Bluetooth

icon will appear on the

LCD screen. This will occur whenever you use the system while the

paired device is within range.