Owner's Manual

SIRIUSXM INSTRUCTIONS

SIRIUSXM SATELLITE RADIO

Only SiriusXM brings you more of what you love to listen

to – all in one place. Get over 140 channels – including

commercial-free music plus the best sports, news, talk,

comedy and entertainment. Welcome to the world of

satellite radio. A SiriusXM Connect tuner and subscription are

required. For more information, visit www.siriusxm.com.

Activating your SiriusXM Subscription

After installing your SiriusXM Connect tuner and antenna, power on

your radio and select the SiriusXM source mode. You should be able

to hear the SiriusXM preview channel on channel 1. If you can’t hear

the preview channel, check your tuner’s installation instructions to

make sure your SiriusXM Connect tuner is properly installed.

Once you can hear the preview channel, tune to channel 0 to

nd the Radio ID of your tuner. The radio ID can also be found on

the bottom of the SiriusXM Connect tuner and its packaging. You

will need this number to activate your subscription. Write down the

number and store it in a safe place for reference.

NOTE: the SiriusXM Radio ID does not include the letters I, O, S or F.

In the USA, you can activate online at www.siriusxm.com/

activatenow or by calling SiriusXM Listener Care at 866.635.2349.

In Canada, you can activate online at www.siriusxm.ca/activatexm

or by calling XM Customer Care at 877.438.9677.

As part of the activation process, the SiriusXM satellites will send an

activation message to your tuner. When your radio detects that the

tuner has received the activation message, your radio will display a

message to conrm that the subscription updated. Once subscribed,

you can tune to channels available in your subscription plan. The

activation process usually takes 10 to 15 minutes, but may take up

to an hour. Your radio will need to be powered on and receiving the

SiriusXM signal to receive the activation message.