Owner's Manual

If SiriusXM does not appear to be functioning properly and one of these advisory

messages appears on the display, try some of these troubleshooting tips.

CHK TNR (Check Tuner)

This message indicates an issue with your SiriusXM Connect Tuner.

• Check that your tuner is securely plugged into the back of the radio

• Check the wires between your unit and the SiriusXM tuner for damage

• Check the tuner to insure that it is not damaged

CHEK ANT (Check Antenna)

This message indicates an issue with your SiriusXM antenna connection.

• Check that your SiriusXM antenna is plugged into the tuner

and that the connection is secure

• Check that the SiriusXM antenna is not damaged

• If the antenna connections are secure and the advisory message is still

displayed, turn the radio off and back on to reset the advisory message

BUSY (No Signal)

This message indicates that your SiriusXM tuner is acquiring the audio or program

information from the satellite. If this message does not go away after a few seconds,

the satellite signal is too weak at your current location. To solve this issue:

• Make sure the antenna is mounted away from metal objects

• Move the vehicle to a new location – especially if your vehicle is parked

underground or in a parking garage

CH UNAVL (Channel Unavailable)

This message indicates that the current channel is unavailable.

This can happen for a number of reasons:

• The channel may no longer be available on SiriusXM

• The channel may not be available with your current SiriusXM subscription package

CH LOCKED (Mature Channel Locked)

This message indicates that the channel has been locked

by the Mature Channel Lock.

• Tune to a channel that is not locked by the Mature Channel Lock

• Disable the Mature Channel Lock (see page 33 for instructions)

SIRIUSXM TROUBLESHOOTING