Owner's manual

ManualsBrandsRetsch ManualsEquipmentGM 200

Operating the machine

Pos: 8.14 /00005 Ü berschriften/ 1.1 Überschrifte n/1.1 Überschrift en BDA/11 Be dienung des G erätes @ 0\m od_12294164657 74_9.doc @ 5 052 @ @ 1

5.4 Operating the Device

Pos: 8.15 /00004 Warnhinweis e/V0007 VORSICHT Herabfall en des Gerätes / Standfestig keit @ 1\mod_1248 178329919_9. doc @ 11690 @ @ 1

CAUTION

Device falling down

Incorrect assembly or unsuitable workplace

- The appliance is very heavy and can therefore cause serious personal injuries if

it falls down.

 Operate the device only on a sufficiently large, firm, skid-resistant and

steady workplace.

 Make sure that all equipment feet are steady.

Pos: 8.16 /00004 Warnhinweis e/V0044 VORSICHT Gehörschad en (GM300, SM 200, SM300) @ 1\mod_1248 181519795_9. doc @ 11731 @ @ 1

CAUTION

Damage to hearing

The level of noise can be high depending on the type of material,

the knife used, the speed set and the duration of the grinding

process.

- Noise that is excessive in terms of level and duration can cause

impaired or permanently damaged hearing.

• Ensure suitable sound-proofing measures or wear

hearing protection.

Pos: 8.17 /00005 Ü berschriften/ 1.1 Überschrifte n/1.1 Überschrift en BDA/11 Ei n- / Ausschalte n @ 0\mod_12 29416527496 _9.doc @ 5058 @ @ 1

5.5 Switching On and Off

Pos: 8.18 /00010 Bedienungsa nleitungen Kapitels ammlungen/GM 200 (2010)/001 5 GM200N B edienung/1515 GM 200_2010 Mo dul Ein und Aus schalten @ 3\mod_1279 721702190_9.do c @ 21559 @ @ 1

The main switch is located on the reverse side of the device (L1).

• Switch the main switch on.

The grinding time last used appears in the TIME display.

The speed last used appears in the SPEED display.

Fig. 6: Main switch