Owner's manual

ManualsBrandsRetsch ManualsEquipmentGM 200

Cleaning and service

This overload protection switch disconnects the device from the power supply if the

machine is overloaded.

• After allowing the device to cool down it can be used with the power supply

again by pressing the overload protection switch (K).

Fig. 14: Overload protection switch

Pos: 9.1 /00005 Üb erschriften/1. Üb erschriften/1 Reinigung u nd Wartung @ 0\ mod_12311670 07723_9.doc @ 5450 @ @ 1

6 Cleaning and service

Pos: 9.2 /00004 Warnhinweise/W 0003 WARNUN G Reinigung Stromstoß neu @ 1\mod_12 36239978437_9.d oc @ 7686 @ @ 1

WARNING

Risk of a fatal electric shock

- An electric shock can cause injuries in the form of burns and cardiac

arrhythmia, respiratory arrest or cardiac arrest.

• Do not clean the blender under running water. Use only a cloth dampened

with water.

• Disconnect the power supply plug before cleaning the blender.

Pos: 9.3 /00010 B edienungsanlei tungen Kapitelsa mmlungen/GM 200 (2010)/002 5 GM200N R einigung und W artung/2505 Mod ul Becheraufna hme reinig en @ 4\mod_133 5509265798_ 9.doc @ 2760 6 @ @ 1

Fig. 15: Cleaning the jar support

NOTE

Sample material may get underneath the jar support (Db) where the jar support (D)

frequently gets very dirty as a result of liquid or greasy samples.

• Where necessary also clean the area underneath the jar support (Db).

Material may otherwise, under unfavourable circumstances, get inside the device.