User Manual

5/21/2012 21 Retsch GmbH

Operating software display

When the buttons described below are pressed in the stand-by

mode the actual software version is displayed.

Display operating software:

Press buttons M- and SET simultaneously and keep pressed.

“S” appears in the display “memory”.

Leave operating software display :

Press STOP button.

Replacing the machine fuses

The following visible type fuses are required for the MM 200:

2 MT 3.15 A fuses

Replacing the fuses

• Unplug mains plug from the machine socket A

• By pressing the locking devices on the side of the fuse

compartment B these are released and can be pulled out.

• Replace fuses

• Insert fuse holder B so that it engages.

SET

M-