User manual

Returnstar Interactive Technology Group Co., Ltd.
8
After registration, the software will prompt how many computers you can still register the
software on. If you can‟t register the software on computers up to the amount stipulated on the
software license, the reasons may be:
1. This SN has been used by other people;
2. The retailers sell illegally, please appeal to consumer organization for compensation.
2.3.2.2 Register by USB Key or Receiver
If you want to register by USB Key, please plug the accessory USB Key or Receiver into any
free USB port on your computer. If no Register window appears when you start the IQ
Interactive Education Platform, the registration is successful. In case your 30 trial times have
run out, the computer will prompt you to register every time you start the software, here you
can also plug the USB Key or Receiver before starting the IQ Interactive Education Platform
for registration.
2.3.2.3 Register by Hardware Verification
IQ Interactive Education Platform V5.1 can be registered by connecting with any IQBoard,
except virtual series. If you want to register by Hardware Verification, please install relevant
whiteboard driver and connect whiteboard with your PC. If no Register window appears when
you start the IQ Interactive Education Platform, the registration is successful. In case your 30
trial times have run out, the computer will prompt you to register every time you start the
software, here you can also connect whiteboard with your PC before starting the IQ
Interactive Education Platform for registration.
2.4 Update
After starting IQ Interactive Education Platform, the system will automatically check whether
the update package is available. If so, it will prompt you to update. Operation is as follow:
1. Click “Yes” to update the software, click “No” if you don‟t want to update now. You can also
click the taskbar icon, and select “Update” to enter Update window. If it is the first time you
update the software, you may need to enter your user information.
Note: If you remove USB Key or Receiver when using the Platform, prompt will popup as below.