IQSlate V3.0 User Manual Copyright(C) 2003-2011 Fuzhou Returnstar Technology Co., Ltd. Website: www.recoverystar.com; www.iqboard.net Tel: 0086-591-87274373 Fax: 0086-591-87274383 E-mail: master@recoverystar.
Statement This manual is for IQSlate V3.0. Use this product strictly according to the detailed operation instruction in this manual so as to ensure proper use. Please read this manual carefully before you install this product. Opening the package means you have agreed to purchase this product, Returnstar will not accept returns of opened packages. The product specification may be subject to change without prior notice. The sample pictures in this User Manual may differ from the real product.
TABLE OF CONTENTS STATEMENT .............................................................................................. 2 TRADEMARK NOTICE .................................................................................. 2 RECYCLING ............................................................................................... 2 TEMPERATURE AND HUMIDITY REQUIREMENTS ............................................... 2 CHAPTER 1 PRODUCT INTRODUCTION...........................................................
Chapter 1 Product Introduction IQSlate is our wireless interactive tablet that allows you to wirelessly interactive with your computer or interactive whiteboard. You can use the interactive Digital Pen to perform mouse functions, write notes or control computer programs directly on the active area of the tablet. IQSlate has the following features: Teach wherever you want IQSlate is small enough to be held in hand easily.
Chapter 2 Specifications 2.1 Performance Digitizing Technology Electromagnetic, use battery-free Digital Pen to write and operate Size 245mm×235mm×20mm Active Area 6″× 4″ Weight 0.5kg (Tablet + Digital Pen) Pressure Sensitivity 1024 levels, can sense pressure from 7g-500g, the sensing range can be customized. Allow users to write with the Digital Pen leaned in any direction. The writing feel is as natural as writing with marker pen. Resolution 4000lpi Precision ±0.
Patents Possess all hardware patents and software intellectual property rights Warranty 1 year for Tablet, Digital Pen and Signal Receiver 2.2 Part List Picture Name Quantity Tablet 1 1. Power Indicator; 2. Signal Indicator; 3. Virtual Hotkeys; 4. Work Area; 5. Battery Chamber; 6. Receiver Socket; 7. Channel Button; 8. Wake Up Button; 9. Reset Button; 10.
Signal Receiver 1 Digital Pen 1 Lithium Battery 1 Pen Stand 1 Note: 1. The battery is low when it leaves the factory. You’d better charge it by using external charger when you use it for the first time. Later on, you just need to input the battery into the Battery Chamber on the IQSlate to charge by connecting IQSlate with computer. 2. You need buy the external charger by yourself.
Chapter 3 How to Connect IQSlate with Computer Signal Receiver of the IQSlate is used to communicate with the computer. You can connect IQSlate and your computer directly or wirelessly. 3.1 Wired Connection Step 1. Insert the USB terminal of the Signal Receiver into a USB socket of your computer Step 2. Insert the Signal Receiver into the receiver socket on the back of IQSlate. Step 3. If it is the first time you use IQSlate on your computer, you should install the driver.
Step 2. Close the battery chamber cover. Step 3. Insert the USB terminal of the Signal Receiver into a USB socket of your computer. You don’t need to insert the Signal Receiver into the receiver socket of IQSlate. Step 4. If it is the first time you use IQSlate on your computer, you should install the driver and create wireless connection. Then you can start using IQSlate.
Chapter 4 How to Connect IQSlate with Projector IQSlate can work with whiteboard, projector and LCD TV. In case you want to use projector, open the projector after connection, and adjust it to make its projection image within the projection area and centered. Then use the trapezoid rectification function of the projector to make the projection image quadrate. Note: Please do not place the cable on the ground to avoid stumble.
Chapter 5 How to Install and Uninstall Driver 5.1 How to Install Driver Run “IQSlate Drivers.exe” in the installation CD, and install the driver according to the on-screen instructions. After the installing process is finished, please restart your computer. 5.2 How to Uninstall Driver Select “Start > Programs > IQSlate Drivers > Uninstall” to uninstall the driver.
Chapter 6 How to Charge Battery IQSlate uses a rechargeable lithium battery as the wireless power source. You are advised to fully charge the battery before using IQSlate. Charging IQSlate is simple. You only need to connect IQSlate with your computer. IQSlate will take approximately 6 hours to charge.
Chapter 7 How to Customize IQSlate After you installed the IQSlate driver on your computer, you can customize the way the Digital Pen or Tablet works. This chapter describes how to create a wireless connection between IQSlate and your computer, and how to adjust your tablet and Digital Pen settings. 7.1 Launch Settings Program Step 1. Select “Start > Programs > IQSlate Drivers > IQSlate Drivers”, or double-click “IQSlate Drivers” on the desktop, the IQSlate taskbar icon appears. Step 2.
7.2.1 Add Wireless Connections Step 1. If you want to connect one tablet with several Signal Receivers, you should click “Sync” first to prevent signal interference. Otherwise, you can skip this step. Step 2. Press and hold the button on Signal Receiver for 3 seconds, until the indicator on Signal Receiver flashes. Step 3. When the indicator on Signal Receiver is flashing, use the Digital Pen to press the “Code” button on the tablet back. Following Add Tablet window appears.
Note: 1. The indicator will only flash for 15 seconds, please finish step 3 within this period. Otherwise, please redo from step 2. 2. In case the battery is not installed or the tablet is in hibernation status, the Add Tablet window will not appear. Please check the battery, and press the “Wake Up” button on the left side of the tablet or press the “Reset” button at the bottom right of the tablet back to reset the tablet. Then redo from step 2. 3.
7.2.3 Remove Wireless Connection between IQSlate and Your Computer Step 1. When the Signal Receiver is connected to your computer, select one or more tablets in the tablet list Step 2. Click “Delete” button to remove wireless connection between these tablets and your computer, and delete these tablets from the tablet list.
7.3 Hotkey Settings IQSlate has 6 hotkeys on the left side of work area to achieve some frequently used functions of IQBoard Software. The default functions of theses hotkeys are Add Page, Save File, Previous Page, Next Page, Mouse, Black Pencil, Red Pencil, Blue Pencil, Green Pencil, Eraser, Magnifier, Reveal Screen, Spotlight, and Start. You can also customize the functions of these hotkeys. Operation steps are as follows: Step 1. Click “Hotkey Settings” on the taskbar icon menu.
Following is the brief explanation of these functions. Add Page: In Windows Mode, press this key to clear all annotations on the screen. In Board Mode, press this key to add a new page in current “cdf” file. Save File: In Windows Mode, press this key to save all annotations on screen to a page in current file. In Board Mode, press this key to save the current “cdf” file. Previous Page: Press this key to go to the previous page. Next Page: Press this key to go to the next page.
7.4 System Settings System Settings include Pen Settings and Area Settings. Here you can customize the Digital Pen and Work Area. 7.4.1 Pen Settings To make the Digital Pen more comfortable to use, you can customize its Tip Feel, Double-click Speed and Right-click function. Tip Feel Move the Tip Feel slider to customize the amount of pressure needed to click or write, or ink. After adjusting the Tip Feel, you can try to wirte in the Writing Test Area.
Disable Right-click Tick the checkbox of “Disable Right-click” to disable the right-click function of the Digital Pen. Disable Pressure Sensing Tick the checkbox of “Disable Pressure Sensing” to disable the pressure sensing function of the Digital Pen. 7.4.2 Area Settings The Area Settings options enable you to define the relationship between pen movement on the tablet surface and cursor movement on the screen.
Map partial Work Area to the entire screen 1. Select “Entire Screen”. 2. Select “Manual Adjust”, 3. Drag borders of the Work Area to define the Work Area that will be mapped to your entire screen area. 3. Click “Apply”. Map the entire Work Area of the tablet to partial screen. 1. Select “Partial Screen”. 2. Click on the screen to define the top left corner and the bottom right corner of the screen area that will be mapped to your tablet Work Area. 4. Click “Apply”.
Chapter 8 How to Use IQSlate 8.1 How to Use Digital Pen Single-click: Press the tablet Work Area with pen tip at proper strength. Double-click: Press the tablet Work Area twice with pen tip at proper strength. Make sure you press at the same point. Right-click: Lift the Digital Pen 1mm-1cm from the tablet, and press the side switch of the Digital Pen. Move: Lift the Digital Pen 1mm-1cm from the tablet, and move the Digital Pen.
Chapter 9 FAQ 1. When operating and writing on the tablet, the system responds slowly, or the stroke is intermittent. 1) The computer is not under normal running or the memory is occupied too much. Please close some applications or restart the computer. 2) The operating or writing force is uneven. Sometimes the force is too light to be sensed. 2. Under wireless connection, when you move the pen tip across the tablet Work Area, the pointer doesn’t move on the display. 1) The battery runs out.
Chapter 10 Cautions and Maintenance Tablet Before cleaning the tablet, please disconnect the tablet with your computer. Please use soft cloth to clean the tablet. Please do not use sharp or pointed objects to scratch the tablet. During the usage, please do not knock the surface fiercely with the digital pen. Please do not put the additional weight or pressure on the tablet. Please do not bend the tablet. Please do not use the tablet in dusty, foggy, wet and inclement environment.