Instructions / Assembly

3
FIG.
4
INSTALLATION INSTRUCTIONS: BLUM 432 VANITY SC FILLER
STEP 3
STEP 4
Pre-drill holes using your
3/16” drill bit. See the table
below for measurements
specic to your ller height.
After pre-drilling has been
completed on one cabinet
side, repeat with adjacent
cabinet.
Mount ller cabinet pullout to
adjacent cabinets. Make sure
ller is ush with the top of
the cabinet wall and behind
the face-frame if applicable.
Mount ller cabinet pullout to
remaining adjacent cabinet.
Screw 432 to cabinet top from above
adjacent cabinet
From inside and above the adjacent
cabinet foor, screw the 432 to cabinet
bottom
Remove front shipping strap.
(See Fig 4)
Attach onlays or door panels.
(not provided). (See Fig 5)
NOTE
Metal brackets cannot be
pre-drilled or screwed into.
Shipping Strap
FIG.
3
FIG.
5
FIG.
4
Filler Size (Height)
Measurement #1
From Top of Cabinet, Down
Measurement #2
From Top of Cabinet, Down
26” Filler 3/8” 23-7/8”
30” Filler 3/8” 27-7/8”
Install onlay using slots for side to
side adjustment
Use micro adjustment screw for door
tilt adjustment
#2
#2
3
16