Instructions / Assembly

ManualsBrandsRev-A-Shelf ManualsKitchen19.5 in. H x 5.25 in. W x 22.44 in. D Pull-Out Wood Foil Wrap/Tray Divider Cabinet Organizer

Wood Assembly

Divider

Holder Assembly

TRI-Slide Assembly

Adjustable Mounting Bracket (AMB Brackets)

Carriage Bolt

Flat Washer

Lock Nut

T-Nut

T-Nut Bolt

#8 x 3/4 Pan Head Sheet Metal Screws

#6 x 1/2 Flat Head Sheet Metal Screws

Adjustable Rub Bushing

14 Adjustable Rub Bushing Installation Kit

with Instruction Sheet (I-ARBKIT-0312)

447 Series Instruction Sheet

MATERIALS

9 10

6 7 8

Wood Assembly

Divider

Holder Assembly

TRI-Slide Assembly

Adjustable Mounting Bracket (AMB Brackets)

Carriage Bolt

Flat Washer

Lock Nut

T-Nut

T-Nut Bolt

#8 x 3/4 Pan Head Sheet Metal Screws

#6 x 1/2 Flat Head Sheet Metal Screws

Adjustable Rub Bushing

14 Adjustable Rub Bushing Installation Kit

with Instruction Sheet (I-ARBKIT-0312)

447 Series Instruction Sheet (I-447-TRI-0815)

MATERIALS

I-447-1115-TRI

9 10

6 7 8

1Wood Assembly

2 Divider

3Holder Assembly

4TRI-Slide Assembly

5Adjustable Mounting Bracket (AMB Brackets)

6Carriage Bolt

7Flat Washer

8Lock Nut

9T-Nut

10T-Nut Bolt

11#8 x 3/4 Pan Head Sheet Metal Screws

12#6 x 1/2 Flat Head Sheet Metal Screws

13Adjustable Rub Bushing

14Adjustable Rub Bushing Installation Kit

with Instruction Sheet (I-ARBKIT-0312)

15447 Series Instruction Sheet (I-447-TRI-0815)

INSTALLATION INSTRUCTIONS: 447 SERIES TRAY / WRAP ORGANIZERS

STEP 1

See FIGURE 2

Center cabinet slide assembly on

cabinet oor 7/8” from front outside

edge of cabinet.

NOTE

If installing into a cabinet with an

inset door, move the slide assembly

back additionally the thickness of the

door.

STEP 2 STEP 3

See FIGURE 1

Disengage cabinet slide assembly

from unit by pressing release levers

on the two vertical slides and

pulling unit away from cabinet slide

assembly.

See FIGURE 3

Mount cabinet slide assembly to

cabinet oor with provided screws.

FIGURE 3

FIGURE 2

FIGURE 1

MATERIALS

INSTALLATION

INSTRUCTIONS

447 SERIES TRAY / WRAP ORGANIZERS

12400 Earl Jones Way, Louisville, KY 40299

(800) 626-1126 | www.rev-a-shelf.com

ESTIMATED ASSEMBLY

TIME:

20 MIN

CARE AND MAINTENANCE:

TO CLEAN, WIPE WITH A

DAMP CLOTH

PART # I-447-TRI-0815

TOOLS REQUIRED:

910

678

1Wood Assembly

2 Divider

3Holder Assembly

4TRI-Slide Assembly

5Adjustable Mounting Bracket (AMB Brackets)

6Carriage Bolt

7Flat Washer

8Lock Nut

9T-Nut

10T-Nut Bolt

11#8 x 3/4 Pan Head Sheet Metal Screws

12#6 x 1/2 Flat Head Sheet Metal Screws

13Adjustable Rub Bushing

14Adjustable Rub Bushing Installation Kit

with Instruction Sheet (I-ARBKIT-0312)

15447 Series Instruction Sheet (I-447-TRI-0815)

INSTALLATION INSTRUCTIONS: 447 SERIES TRAY / WRAP ORGANIZERS

STEP 1

See FIGURE 2

Center cabinet slide assembly on

cabinet oor 7/8” from front outside

edge of cabinet.

NOTE

If installing into a cabinet with an

inset door, move the slide assembly

back additionally the thickness of the

door.

STEP 2 STEP 3

See FIGURE 1

Disengage cabinet slide assembly

from unit by pressing release levers

on the two vertical slides and

pulling unit away from cabinet slide

assembly.

See FIGURE 3

Mount cabinet slide assembly to

cabinet oor with provided screws.

FIGURE 3

FIGURE 2

FIGURE 1

MATERIALS

INSTALLATION

INSTRUCTIONS

447 SERIES TRAY / WRAP ORGANIZERS

12400 Earl Jones Way, Louisville, KY 40299

(800) 626-1126 | www.rev-a-shelf.com

ESTIMATED ASSEMBLY

TIME:

20 MIN

CARE AND MAINTENANCE:

TO CLEAN, WIPE WITH A

DAMP CLOTH

PART # I-447-TRI-0815

TOOLS REQUIRED:

910

678

Screws installed to the oor

12400 Earl Jones Way

Louisville, KY 40299

rev-a-shelf.com

Customer Service: 800-626-1126

447 SERIES TRAY / WRAP ORGANIZERS

TOOLS REQUIRED:

20 MIN

ESTIMATED ASSEMBLY TIME:

CARE AND MAINTENANCE:

Clean with a damp cloth and

wipe parts dry.

12400 Earl Jones Way

Louisville, KY 40299

rev-a-shelf.com

Customer Service: 800-626-1126

447 SERIES TRAY / WRAP ORGANIZERS

TOOLS REQUIRED:

20 MIN

ESTIMATED ASSEMBLY TIME:

CARE AND MAINTENANCE:

Clean with a damp cloth and

wipe parts dry.

I-447-1115-TRI

Summary of content (8 pages)

PAGE 1
2400 Earl Jones Way Louisville, KY 40299 rev-a-shelf.com Customer Service: 800-626-1126 447 SERIES TRAY / WRAP ORGANIZERS 12400 Earl Jones Way Louisville, KY 40299 rev-a-shelf.com Customer Service: 800-626-1126 447 SERIES TRAY / WRAP ORGANIZERS INSTALLATION INSTRUCTIONS 12400 Earl Jones Way, Louisville, KY 40299 (800) 626-1126 | www.rev-a-shelf.
PAGE 2
STEP 1 Disengage cabinet slide assembly from unit by pressing release levers on the two vertical slides and pulling unit away from cabinet slide assembly. (Fig 1) STEP 2 Center cabinet slide assembly on cabinet floor 7/8” from front outside edge of cabinet. (Fig 2) FIG. 1 FIG. 2 Note If installing into a cabinet with an inset door, move the slide assembly back additionally the thickness of the door. 3 7 32 64 #2 2 mm FIG.
PAGE 3
STEP 4 Engage product slide assembly to cabinet slide assembly. (Fig 4) NOTE Before engaging the product into the cabinet slide assembly, be sure to move the ball bearing tracks found inside the cabinet slide assembly to the front of the slide assembly so they are flush with the black mouth piece caps. FIG. 4 FIG. 5 STEP 5 Attach door to unit.
PAGE 4
Door Adjustment Section STEP 6 FIG. 6A To adjust your cabinet door side to side use a 3/8-in wrench, you will want to use the “Lock Nut” adjustment, refer to FIG 6A for the “Lock Nut” location. NOTE All “Lock Nuts” must be loose in order for the door to move completely left or right. 3 8 Lock Nut/ T-Nut STEP 7 Tighten “Adjustment Screw” (this will push mounting bracket out) until cabinet door is at desired position.
PAGE 5
12400 Earl Jones Way Louisville, KY 40299 rev-a-shelf.com 800-626-1126 INSTRUCCIONES DE INSTALACIÓN / LES INSTRUCTIONS D’INSTALLATION SERIES DE BANDEJA 447/ORGANIZADORES PARA PLÁSTICOS LA SÉRIE 447 D’ORGANISATEURS À PLATEAUX ET À PAPIER D’EMBALLAGE 12400 Earl Jones Way Louisville, KY 40299 rev-a-shelf.
PAGE 6
1 Suelte el ensamblado del gabinete de la unidad, presionando la palanca de liberación en los dos deslizantes verticales, jale la unidad fuera del ensamble del deslizante del gabinete. (Fig 1) FIG. 1 Désengagez l’assemblage de la coulisse de l’armoire de l’unité en appuyant sur les leviers de dégagement sur les deux coulisses verticales et en retirant l’unité hors de l’assemblage de la coulisse de l’armoire.
PAGE 7
4 Enganche el deslizante del producto ensamblado al deslizante del gabinete. (Fig 4) NOTA: Antes de enganchar el producto dentro del deslizante del gabinete, asegúrese de mover al frente los rieles de los baleros que se encuentran dentro del ensamble de deslizante del gabinete para que estén al ras con las cubiertas de boca negra. FIG. 4 Engagez l’assemblage de la coulisse du produit dans l’assemblage de la coulisse de l’armoire.
PAGE 8
SECCIÓN DE AJUSTE DE LA PUERTA SECTION SUR L’AJUSTEMENT DE LA PORTE 6 FIG. 6A Para ajustar el lado de la puerta de su gabinete, utilice una llave de 3/8 pulgadas, usted querrá utilizar el ajuste de “Tuerca de Seguridad”, refiérase a la figura 6ª para la ubicación de la “Tuerca de Seguridad”. NOTA: Todas las “Tuercas de Seguridad”, deben estar sueltas a fin de que la puerta se mueva completamente a la izquierda o a la derecha.